UTAS Landing Systems Document 200 - Approved Processors

111 Pages·2017·3.07 MB·English

by  Chuck Beargie

UTAS Landing Systems
Document 200 - Approved Processors
Data Updated: March 2, 2018
Revision Document 200 Text - Summary of Changes Date By
NC Original 1/16/2009 CJB
A Update to current practice 9/30/2010 CJB
Added second last sentence to 5.0 fourth paragraph, corrected
B 5/23/2012 CJB
Document 300 reference.
C Added Notes Tab 9/18/2012 CJB
D Entire document: UTAS was Goodrich 4/16/2013 CJB
E Added DDTC note 6 to Notes tab, and DDTC data to Listing tab 9/19/2013 CJB
F Added STRESS RELIEF note 7 to Notes tab. 12/3/2013 CJB
Added Nadcap Exceptions tab, revised Nadcap reqm'ts table,
G 4/11/2014 CJB
combined Note 7 into Note 1, revised Note 5.
H Added Note 7 to Notes tab, paint touch-up to exceptions tab 8/19/2014 CJB
Text tab: Content Server was LiveLink, 4.2 added description of
fourth thru sixth tabs
J 3/13/2015 CJB
Nadcap Exceptions tab: revised CMSP to include the option for
Nadcap AC7109/8 accreditation for the grinding of HVOF
Revised note 6 on Notes tab to differetiate ITAR vs. EAR controlled
K military programs for the DDTC license. 4/24/2015 CJB
Added Export Ctrl tab.
Landing Systems was Landing Gear, LS was LG, LS-SBU-A001-
L 4/15/2016 CJB
SQA was Document 300. Add ISO17025 for NDT.
Revised the naming of the special processes in the SQA database
M 6/16/2016 CJB
and thus also in Document 200.
Revised the naming of the special processes on the
N 8/2/2016 CJB
"Processes w RPN & Nadcap reqm't" tab.
1.0 Purpose

The purpose of this document is to a) identify special processes that require UTAS Landing Systems
approval of sources performing the process, and to b) provide a list of approved sources for these
processes. The following text is provided for guidance and informational purposes only. In the event of
any conflict between this document and LS-SBU-A001-SQA, LS-SBU-A001-SQA takes precedence.

2.0 Applicability

The UTAS Landing Systems Document 200 is applicable to suppliers and sub-tier sources of special
processes where UTAS Landing Systems LS-SBU-A001-SQA is invoked by reference in UTAS Landing
Systems purchase orders or LTA’s (Long Term Agreements). No deviation from the requirements
contained within this document is permitted unless specifically defined in LS-SBU-A001-SQA, or with
written concurrence of UTAS Landing Systems Supplier Quality Assurance.
The requirements of this document do not apply for “Raw Material” purchased to a metallic raw material
specification (AMS, MIL, QQ-A, etc.) unless the processor is specifically required by applicable
specifications.

3.0 Responsibility
UTAS Landing Systems Supplier Quality Assurance is responsible for the management and
administration of the requirements contained within this document.
UTAS Landing Systems approved suppliers of product or services, where LS-SBU-A001-SQA is invoked
This document does not contain any export controlled technical data and is not subject to the regulations.
on the pertinent purchase order or LTA’s, are responsible to comply with all applicable requirements
contained within this document.
UTAS Landing Systems approved processors shall operate under a QMS Quality Management System
(i.e. AS9100, Nadcap AQS, ISO17025, ISO9001, etc. as recognized by the applicable Nadcap task
group) to obtain and maintain approval status. A QMS registration certificate can serve as proof of
compliance; otherwise a LS audit for compliance may be required.
UTAS Landing Systems approved processors shall maintain Nadcap certification for those processes that
require Nadcap certification. Document 200 defines the processes that require Nadcap certification.

4.0 General

4.1 Reference Documents

Document No. Title

LS-SBU-A001-SQA LS Supplier and Product Quality Requirements
1.0 Purpose

The purpose of this document is to a) identify special processes that require UTAS Landing Systems
approval of sources performing the process, and to b) provide a list of approved sources for these
processes. The following text is provided for guidance and informational purposes only. In the event of
any conflict between this document and LS-SBU-A001-SQA, LS-SBU-A001-SQA takes precedence.

2.0 Applicability

The UTAS Landing Systems Document 200 is applicable to suppliers and sub-tier sources of special
processes where UTAS Landing Systems LS-SBU-A001-SQA is invoked by reference in UTAS Landing
Systems purchase orders or LTA’s (Long Term Agreements). No deviation from the requirements
contained within this document is permitted unless specifically defined in LS-SBU-A001-SQA, or with
written concurrence of UTAS Landing Systems Supplier Quality Assurance.
The requirements of this document do not apply for “Raw Material” purchased to a metallic raw material
specification (AMS, MIL, QQ-A, etc.) unless the processor is specifically required by applicable
specifications.

3.0 Responsibility
UTAS Landing Systems Supplier Quality Assurance is responsible for the management and
administration of the requirements contained within this document.
UTAS Landing Systems approved suppliers of product or services, where LS-SBU-A001-SQA is invoked
on the pertinent purchase order or LTA’s, are responsible to comply with all applicable requirements
contained within this document.
UTAS Landing Systems approved processors shall operate under a QMS Quality Management System
(i.e. AS9100, Nadcap AQS, ISO17025, ISO9001, etc. as recognized by the applicable Nadcap task
group) to obtain and maintain approval status. A QMS registration certificate can serve as proof of
compliance; otherwise a LS audit for compliance may be required.
UTAS Landing Systems approved processors shall maintain Nadcap certification for those processes that
require Nadcap certification. Document 200 defines the processes that require Nadcap certification.

4.0 General

4.1 Reference Documents

Document No. Title

LS-SBU-A001-SQA LS Supplier and Product Quality Requirements
4.2 Definitions
Approved Processor listing: The listing of special processes, individual process specifications, and the
sources approved by UTAS Landing Systems to perform these processes to the noted specifications.
The UTAS Landing Systems authorized Approved Processor listing is an Excel file located on Content
Server. The Excel file has six worksheets. The first worksheet has this requirements text, the second
worksheet has the Approved Processor list, the third worksheet has a listing of revisions to the list, the
fourth has Notes, the fifth lists which air craft platforms require export control, the sixth lists the controlled
processes with their RPN and Nadcap accreditation requirement, and the seventh lists the exceptions to
Nadcap accreditation requirements.
Approved Processor: A company that has been granted approved status for performing specific special
processes as defined by the Approved Processor Listing. This approval is based on compliance to the
quality system requirements of this document, and compliance to the listed process specification(s).
Approved Supplier: A company that has been granted approved status for supplying product to UTAS
Landing Systems based on compliance to the quality management system requirements of LS-SBU-
A001-SQA.
Special Processes: Only those processes listed on the Processes tab (sixth tab) are considered by UTAS
Landing Systems to be controlled special processes that require the entity performing the process to be
pre-approved by UTAS Landing Systems. This may include processes that do not require approval by
UTAS Landing Systems customers and may not include processes for which approval is required by
UTAS Landing Systems customers.
5.0 Approved Processor Listing
UTAS Landing Systems Supplier Quality Assurance is responsible for maintaining the Approved
Processor listing. The listing is revised as changes are received, reviewed, and approved by the Supplier
Quality Assurance organization. The listing as posted on Content Server is refreshed on a periodic basis,
approximately monthly, or as often as required.
It is the responsibility of approved suppliers to regularly review the listing to determine approval status of
sources being used.
Document 200 approvals are address or site specific. When special process companies are comprised of
more than one physical site, each physical site shall be approved individually by address in order to be
contracted for use on LS product.
The listing will only contain specifications that are UTAS Landing Systems’s, government issue, or
industry standards. UTAS Landing Systems’s customers (e.g. Boeing, Lockheed, etc.) do not permit LS
to list approval to their specifications; hence their specifications (e.g. BAC’s, PS’s, 5PTP’s, etc.) will not
appear in the listing. When UTAS Landing Systems customer controlled processes are required, (e.g.
Boeing BAC’s, PS’s, Lockheed 5PTP’s, etc.), selected process sources must be listed in both the UTAS
Landing Systems listing as approved for quality system, and also be in the customer’s listing (e.g. Boeing
D1-4426, Lockheed QCS-001, etc.) as approved for the controlled process. Approval to perform a
customer approved special process on LS product is limited to the Special Processes approved for this
company as listed on LS Document 200. Refer to LS-SBU-A001-SQA paragraph 12.2.2.
UTAS Landing Systems approval of a processor does not guarantee product processed by that processor
is acceptable and use of approved processors does not relieve the UTAS Landing Systems supplier from
the obligation to provide finished product in compliance with purchase order and engineering
This document does not contain any export controlled technical data and is not subject to the regulations.
requirements.
Processor, specification, and/or process approvals listed on Doc 200 may be revoked at any time by LS
due to various reasons that include but are not limited to: Nadcap audit failures, lack of work being
performed on LS product, processor initiated escapes and/or disclosures, changes in equipment at
approved sources (no longer performing certain special processes), relocation of approved sources, site
closures at approved sources, modifications to specifications.
5.0 Approved Processor Listing
UTAS Landing Systems Supplier Quality Assurance is responsible for maintaining the Approved
Processor listing. The listing is revised as changes are received, reviewed, and approved by the Supplier
Quality Assurance organization. The listing as posted on Content Server is refreshed on a periodic basis,
approximately monthly, or as often as required.
It is the responsibility of approved suppliers to regularly review the listing to determine approval status of
sources being used.
Document 200 approvals are address or site specific. When special process companies are comprised of
more than one physical site, each physical site shall be approved individually by address in order to be
contracted for use on LS product.
The listing will only contain specifications that are UTAS Landing Systems’s, government issue, or
industry standards. UTAS Landing Systems’s customers (e.g. Boeing, Lockheed, etc.) do not permit LS
to list approval to their specifications; hence their specifications (e.g. BAC’s, PS’s, 5PTP’s, etc.) will not
appear in the listing. When UTAS Landing Systems customer controlled processes are required, (e.g.
Boeing BAC’s, PS’s, Lockheed 5PTP’s, etc.), selected process sources must be listed in both the UTAS
Landing Systems listing as approved for quality system, and also be in the customer’s listing (e.g. Boeing
D1-4426, Lockheed QCS-001, etc.) as approved for the controlled process. Approval to perform a
customer approved special process on LS product is limited to the Special Processes approved for this
company as listed on LS Document 200. Refer to LS-SBU-A001-SQA paragraph 12.2.2.
UTAS Landing Systems approval of a processor does not guarantee product processed by that processor
is acceptable and use of approved processors does not relieve the UTAS Landing Systems supplier from
the obligation to provide finished product in compliance with purchase order and engineering
requirements.
Processor, specification, and/or process approvals listed on Doc 200 may be revoked at any time by LS
due to various reasons that include but are not limited to: Nadcap audit failures, lack of work being
performed on LS product, processor initiated escapes and/or disclosures, changes in equipment at
approved sources (no longer performing certain special processes), relocation of approved sources, site
closures at approved sources, modifications to specifications.
6.0 Special Process Specification Requirements
Special processes are to be performed to the latest released revision of the noted specification, or to the
latest released revision of a noted superseding specification, unless otherwise limited by a) notation on
the approved special process listing, or b) purchase order requirements.
An index of specifications and revisions applicable to product being manufactured to meet UTAS Landing
Systems requirements is available on Content Server. It is the responsibility of the supplier to review the
index and revision log to the extent and frequency needed to ensure compliance to the listed revision
levels of the noted specifications. Should a UTAS Landing Systems customer controlled specification
have a formally released revision later than noted on the index, use of the later revision is acceptable.
The use of a previous revision than that listed on the UTAS Landing Systems index is not acceptable,
unless authorized by written concurrence by UTAS Landing Systems Supplier Quality Assurance prior to
any performance of the special process to the previous revision requirements.
7.0 Processor Approval Process
Approval of a new processor, or approval of additional specification(s) and/or additional processes for a
processor already approved, is only considered when either a UTAS Landing Systems facility or an LS
approved supplier is requesting the source’s approval. Requests for approval must be made in writing to
Suppy Chain Management using form LS DIV SQA FORM 4065 - Request for Processor Approval
(available on Content Server) stating the processor’s company information and listing the processes the
supplier is requesting the processor to support. Due to various reasons, including resource limitations, a
request for approval may be denied; or only partially approved.
UTAS Landing Systems will perform periodic surveillance of approved processors as deemed necessary
to grant and/or maintain approval status.
This document does not contain any export controlled technical data and is not subject to the regulations.
Printed: 3/2/2018
UTAS Landing Gear
Document 200 Approved Processors
DDTC Exp Date
Proc # PROCESSOR (as of March 2, 2018) ADDRESS CITY STATE COUNTRY QA MANAGER TELEPHONE SPECIAL PROCESS SPECIFICATION Limitations
See Note 6
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] AQS - QUALITY SYSTEM AC7004
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] CP01 - COATING, PAINT APPLICATION MIL-F-18264
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] CP12 - PASSIVATION AMS-2700
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] CP12 - PASSIVATION E.S. 6.19
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] CP15 - PRE-PENETRANT ETCH AC7108/15
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] SE - SHOT PEEN AMS-2430
632 2016-02-29 3P Processing, Inc. (3310) 1702 S. Knight Street Wichita KS USA Jon Thomas [phone] SE - SHOT PEEN CPC-6400
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 AQS - QUALITY SYSTEM AS 9100
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP01 - COATING, DRY FILM MIL-PRF-46010
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP01 - COATING, DRY FILM MM-1920
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP01 - COATING, PAINT APPLICATION MIL-F-18264
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP01 - COATING, PAINT APPLICATION MM-5748
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP07 - IVD, ALUMINUM AMS-2427
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP07 - IVD, ALUMINUM MIL-DTL-83488
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP07 - IVD, CADMIUM AMS-C-8837
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP07 - IVD, CADMIUM CPC-8210
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP07 - IVD, CADMIUM MM-4949
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MM-4920
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP11 - CONVERSION COATING, ALUMINUM MM-5516
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP12 - PASSIVATION AMS-2700
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP13 - PLATING, BRUSH CADMIUM LGPS-1102
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 HT - STRESS RELIEF AMS-2759/11
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
15 2017-12-31 AAA Plating & Inspection, Inc. (4342) 424 Dixon Street Compton CA USA Mike Kegley [phone] x223 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108
MPI per BAC5424, FPI per BAC5423 and Passivate per BAC5625
947 Aaxon Labs, Inc. (4574) 4113 Murray Ave Fort Worth TX USA Gary Brothers 817-514-6900 AQS - QUALITY SYSTEM AC7004 only.
947 Aaxon Labs, Inc. (4574) 4113 Murray Ave Fort Worth TX USA Gary Brothers 817-514-6900 CP12 - PASSIVATION AMS-2700
947 Aaxon Labs, Inc. (4574) 4113 Murray Ave Fort Worth TX USA Gary Brothers 817-514-6900 CP15 - PRE-PENETRANT ETCH AC7108/15
947 Aaxon Labs, Inc. (4574) 4113 Murray Ave Fort Worth TX USA Gary Brothers 817-514-6900 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
947 Aaxon Labs, Inc. (4574) 4113 Murray Ave Fort Worth TX USA Gary Brothers 817-514-6900 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
16 Abrasive Finishing Co. 14920 S. Main St. Gardena CA USA Mike Demke [phone] AQS - QUALITY SYSTEM AC7004
16 Abrasive Finishing Co. 14920 S. Main St. Gardena CA USA Mike Demke [phone] SE - SHOT PEEN AMS-2430
16 Abrasive Finishing Co. 14920 S. Main St. Gardena CA USA Mike Demke [phone] SE - SHOT PEEN CP-0340
16 Abrasive Finishing Co. 14920 S. Main St. Gardena CA USA Mike Demke [phone] SE - SHOT PEEN LGPS-1501
1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 AQS - QUALITY SYSTEM AS 9100
1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 HT - HEAT TREAT AMS-2759/3
1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 HT - HEAT TREAT AMS-2759/4
1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 HT - HEAT TREAT AMS-2759/5
1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 HT - HEAT TREAT AMS-2774
1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 HT - HEAT TREAT AMS-5663
1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 HT - HEAT TREAT AMS-H-7199
1470 Accurate Brazing (3093) 36 Cote Ave Goffstown NH USA Dave Cote 603-625-1456 WLD - BRAZING AMS-2675
1249 Acuren Inspection, Inc. (3417) 705 Albany Street Dayton OH USA Chad Schmidt 937-660-9879 AQS - QUALITY SYSTEM ISO 17025
1249 Acuren Inspection, Inc. (3417) 705 Albany Street Dayton OH USA Chad Schmidt 937-660-9879 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
1249 Acuren Inspection, Inc. (3417) 705 Albany Street Dayton OH USA Chad Schmidt 937-660-9879 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] AQS - QUALITY SYSTEM AS 9100
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP01 - COATING, PAINT APPLICATION BR-167
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP01 - COATING, PAINT APPLICATION LGPS-1001
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP01 - COATING, PAINT APPLICATION MIL-F-18264
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP01 - COATING, PAINT APPLICATION MM-5748
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP09 - PLATING, COPPER AMS-2418
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP12 - PASSIVATION AMS-2700 Type 2 and 6 solutions.
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP13 - PLATING, BRUSH CADMIUM MIL-STD-865
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] CP15 - PRE-PENETRANT ETCH AC7108/15
Ovens certified to only 400°F maximum; no Boeing product
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] HT - STRESS RELIEF AMS-2759/11 permitted.
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108
22 2015-10-31 Advanced Coating Technique (4813) 313 Wyandanch Ave N. Babylon NY USA Leandro Aparicio [phone] NDT - INSPECTION, MAGNETIC PARTICLE MM-5537
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 AQS - QUALITY SYSTEM AS 9100
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP01 - COATING, DRY FILM MIL-PRF-46010
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP01 - COATING, PAINT APPLICATION MIL-F-18264
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.107
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.2
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.4
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP09 - PLATING, CADMIUM (BRIGHT/LHE) E.S. 6.18
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP09 - PLATING, CHROME AMS-2406
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP09 - PLATING, CHROME AMS-QQ-C-320
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP09 - PLATING, CHROME E.S. 6.131
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP09 - PLATING, THIN DENSE CHROME AMS-2438
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
Page (4) of (111)
This document does not contain any export controlled technical data and is not subject to the regulations.
Printed: 3/2/2018
UTAS Landing Gear
Document 200 Approved Processors
DDTC Exp Date
Proc # PROCESSOR (as of March 2, 2018) ADDRESS CITY STATE COUNTRY QA MANAGER TELEPHONE SPECIAL PROCESS SPECIFICATION Limitations
See Note 6
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP12 - PASSIVATION AMS-2700
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP12 - PASSIVATION ASTM-A-967
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 CP12 - PASSIVATION E.S. 6.19
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - HEAT TREAT AMS-2759/1
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - HEAT TREAT AMS-2759/2
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - HEAT TREAT AMS-2759/3
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - HEAT TREAT AMS-2759/5
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - HEAT TREAT AMS-2774
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - HEAT TREAT AMS-H-6875
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - HEAT TREAT E.S. 13.3.79
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 HT - STRESS RELIEF AMS-2759/11
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
1317 AECC Guizhou Honglin Aero Engine Control Technology Co., Ltd. No. 111 Songhuajiang Rd. PO Box 177 Xiaohe Guiyang Guizhou China Bella Wang + 86 851 3849760 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 AQS - QUALITY SYSTEM AS 9100
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP02 - TEMPER ETCH INSPECTION MIL-STD-867
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1 I, IB
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP09 - PLATING, CHROME AMS-2460
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP09 - PLATING, CHROME AMS-QQ-C-320
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP09 - PLATING, CHROME LGPS-1101
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 CP12 - PASSIVATION AMS-2700
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 HT - HEAT TREAT AMS-2759
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 HT - HEAT TREAT AMS-2759/3
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 HT - HEAT TREAT AMS-2759/5
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 HT - HEAT TREAT AMS-H-6875
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
932 AECC Xi’an Engine Control Technology Co.Ltd. 750 DaQing Rd. Xi'an Shaanxi China Xu Shuli 0086-29-84675254 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
30 Aerocom Inspection Service Ltd 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley [phone] AQS - QUALITY SYSTEM AC7004
30 Aerocom Inspection Service Ltd 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley [phone] NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
30 Aerocom Inspection Service Ltd 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley [phone] NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
30 Aerocom Inspection Service Ltd 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley [phone] NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108
30 Aerocom Inspection Service Ltd 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley [phone] NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742
30 Aerocom Inspection Service Ltd 2222 S. Sheridan Way Unit 221 Mississiauga Ontario Canada Mike Dudley [phone] NDT - INSPECTION, RADIOGRAPHIC MMC-142
31 Aerocraft Heat Treating Co., Inc. 15701 Minnesota Ave. Paramount CA USA Juan Tejeda [phone] AQS - QUALITY SYSTEM AS 9100
31 Aerocraft Heat Treating Co., Inc. 15701 Minnesota Ave. Paramount CA USA Juan Tejeda [phone] HT - HEAT TREAT AMS-2759/1
31 Aerocraft Heat Treating Co., Inc. 15701 Minnesota Ave. Paramount CA USA Juan Tejeda [phone] HT - HEAT TREAT AMS-2759/2
31 Aerocraft Heat Treating Co., Inc. 15701 Minnesota Ave. Paramount CA USA Juan Tejeda [phone] HT - HEAT TREAT AMS-2759/3
31 Aerocraft Heat Treating Co., Inc. 15701 Minnesota Ave. Paramount CA USA Juan Tejeda [phone] HT - HEAT TREAT AMS-2759/4
31 Aerocraft Heat Treating Co., Inc. 15701 Minnesota Ave. Paramount CA USA Juan Tejeda [phone] HT - HEAT TREAT AMS-2759/5
31 Aerocraft Heat Treating Co., Inc. 15701 Minnesota Ave. Paramount CA USA Juan Tejeda [phone] HT - HEAT TREAT AMS-2774
31 Aerocraft Heat Treating Co., Inc. 15701 Minnesota Ave. Paramount CA USA Juan Tejeda [phone] HT - HEAT TREAT AMS-H-6875
31 Aerocraft Heat Treating Co., Inc. 15701 Minnesota Ave. Paramount CA USA Juan Tejeda [phone] HT - HEAT TREAT AMS-H-81200
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 AQS - QUALITY SYSTEM AS 9100
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP01 - COATING, PAINT APPLICATION LGPS-1001
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP01 - COATING, PAINT APPLICATION MIL-F-18264
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2
CP08 - ANODIZE ALUMINUM -Thin Film Sulphuric
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 Acid LGPS-1109
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP09 - PLATING, ZINC NICKEL AMS-2417
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP09 - PLATING, ZINC NICKEL LGPS-1106
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP12 - PASSIVATION AMS-2700
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 CP12 - PASSIVATION ASTM-A-967
40 Aerospace Metal Finishing 71 Proctor Rd. Schomberg Ontario Canada Tina Wang 416 324-3241 x206 HT - HEAT TREAT AMS-2759/11 APPROVED FOR STRESS RELIEF ONLY.
43 2016-01-31 Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier [phone] AQS - QUALITY SYSTEM AC7004
43 2016-01-31 Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier [phone] NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
43 2016-01-31 Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier [phone] NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
43 2016-01-31 Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier [phone] NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108
43 2016-01-31 Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier [phone] NDT - INSPECTION, ULTRASONIC AMS-STD-2154
43 2016-01-31 Aerospace Testing Lab Inc. (3117) 32 South Satellite Rd South Windsor CT USA Walter Cormier [phone] NDT - INSPECTION, ULTRASONIC CPC-9104
44 2018-03-31 Aerospace Welding Inc. - California (4473) 2035 Granville Ave. Los Angeles CA USA John Green [phone] AQS - QUALITY SYSTEM AC7004
44 2018-03-31 Aerospace Welding Inc. - California (4473) 2035 Granville Ave. Los Angeles CA USA John Green [phone] WLD - WELDING AWS D17.2
44 2018-03-31 Aerospace Welding Inc. - California (4473) 2035 Granville Ave. Los Angeles CA USA John Green [phone] WLD - WELDING ISO 15614-13
44 2018-03-31 Aerospace Welding Inc. - California (4473) 2035 Granville Ave. Los Angeles CA USA John Green [phone] WLD - WELDING MIL-W-6873 Part number 2042-73 only.
1155 2014-11-26 Aerospace Welding Inc. - Quebec (6347) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa 450-435-9210 AQS - QUALITY SYSTEM AS 9100
1155 2014-11-26 Aerospace Welding Inc. - Quebec (6347) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa 450-435-9210 CP01 - COATING, PAINT APPLICATION MIL-PRF-85285 For MRO work only
1155 2014-11-26 Aerospace Welding Inc. - Quebec (6347) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa 450-435-9210 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
1155 2014-11-26 Aerospace Welding Inc. - Quebec (6347) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa 450-435-9210 CP15 - PRE-PENETRANT ETCH AC7108/15
1155 2014-11-26 Aerospace Welding Inc. - Quebec (6347) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa 450-435-9210 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
1155 2014-11-26 Aerospace Welding Inc. - Quebec (6347) 890 Michele-Bohec Blainville Quebec Canada Gabriela Ioneasa 450-435-9210 WLD - WELDING AWS-D17.1
1063 2016-08-26 Aerosphere Inc. 21 Aviation Blvd. Suite 100 Pointe-Claire, Quebec Canada Sebastien Lepine 514-429-4040 AQS - QUALITY SYSTEM AS 9100
1063 2016-08-26 Aerosphere Inc. 21 Aviation Blvd. Suite 100 Pointe-Claire, Quebec Canada Sebastien Lepine 514-429-4040 SE - SHOT PEEN AMS-2430
1063 2016-08-26 Aerosphere Inc. 21 Aviation Blvd. Suite 100 Pointe-Claire, Quebec Canada Sebastien Lepine 514-429-4040 SE - SHOT PEEN LGPS 1501
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 AQS - QUALITY SYSTEM AS 9100
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP01 - COATING, DRY FILM MIL-PRF-46010
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP01 - COATING, PAINT APPLICATION MIL-F-18264
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP07 - IVD, ALUMINUM AMS-2427 MRO work only
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP07 - IVD, ALUMINUM MIL-DTL-83488 MRO work only
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-2400
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP09 - PLATING, COPPER AMS-2418
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP09 - PLATING, SILVER ASTM-B-700
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP09 - PLATING, TIN ASTM-B-545
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 Also capable of Type II (non-hexavalent) chromate conversion.
CP11 - CONVERSION COATING, STEEL, PHOSPHATE
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 MANG/ZN MIL-DTL-16232
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP12 - PASSIVATION AMS-2700
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 CP12 - PASSIVATION ASTM-A-967
48 AeroTek Manufacturing Limited - CAD 1449 HOPKINS ST. Whitby Ontario Canada Rodney Patricio [phone] ext 304 HT - STRESS RELIEF AMS-H-6875
Approval supports manufacture and processing of 65B70327 to
1143 AGC AeroComposites - Hayden 10413 N. Aero Drive Hayden ID USA Ron Curry 800-775-0861 AQS - QUALITY SYSTEM AS 9100 Boeing specifications.
12 AH Plating 1837 N Victory Pl. Burbank CA USA Phyllis Eackelbary [phone] AQS - QUALITY SYSTEM AC7004
12 AH Plating 1837 N Victory Pl. Burbank CA USA Phyllis Eackelbary [phone] CP02 - TEMPER ETCH INSPECTION MIL-STD-867
Page (5) of (111)
This document does not contain any export controlled technical data and is not subject to the regulations.
Printed: 3/2/2018
UTAS Landing Gear
Document 200 Approved Processors
DDTC Exp Date
Proc # PROCESSOR (as of March 2, 2018) ADDRESS CITY STATE COUNTRY QA MANAGER TELEPHONE SPECIAL PROCESS SPECIFICATION Limitations
See Note 6
12 AH Plating 1837 N Victory Pl. Burbank CA USA Phyllis Eackelbary [phone] CP09 - PLATING, CHROME AMS-QQ-C-320
12 AH Plating 1837 N Victory Pl. Burbank CA USA Phyllis Eackelbary [phone] CP09 - PLATING, CHROME E.S. 6.194
686 2017-07-31 AIM Aerospace Sumner Inc. 1516 Fryar Ave. Sumner WA USA Ken Fagan 253-863-7868 AQS - QUALITY SYSTEM AS 9100 Flame Spray Aluminum Coating per BAC 5056 only.
As per contractual and engineering drawing requirements,
686 2017-07-31 AIM Aerospace Sumner Inc. 1516 Fryar Ave. Sumner WA USA Ken Fagan 253-863-7868 COMP - COMPOSITES N/A including BAC5317.
52 2016-02-29 Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill 631-968-5000 ,QM:631-328-7029 AQS - QUALITY SYSTEM AS 9100
Limited to the use of the Alodine 1132 felt tipped marker type
52 2016-02-29 Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill 631-968-5000 ,QM:631-328-7029 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541 materials to local areas only. No Boeing D1-4426 approval.
52 2016-02-29 Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill 631-968-5000 ,QM:631-328-7029 CP13 - PLATING, BRUSH CADMIUM LGPS-1102 No Boeing D1-4426 approval.
52 2016-02-29 Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill 631-968-5000 ,QM:631-328-7029 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865 No Boeing D1-4426 approval.
52 2016-02-29 Air Industries Machining Corp 1479 CLINTON AVENUE BAY SHORE NY USA John Dill 631-968-5000 ,QM:631-328-7029 NA - ROLLER BURNISHING BR-163 Approved for holes from 0.2576" to 2.963".
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 AQS - QUALITY SYSTEM AC7004
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 CP01 - COATING, DRY FILM MIL-L-46010
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 CP01 - COATING, PAINT APPLICATION MIL-F-18264
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MM-4920
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 CP11 - CONVERSION COATING, ALUMINUM MM-5516
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 CP12 - PASSIVATION AMS-2700
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 CP15 - PRE-PENETRANT ETCH AC7108/15
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108
58 2018-04-30 Aircraft X-Ray Laboratories, Inc. (3314) 5216 PACIFIC BLVD. HUNTINGTON PARK CA USA Juan M. Perez [phone] x112 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742
1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 AQS - QUALITY SYSTEM AC7004
1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - HEAT TREAT AMS-2759/1
1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - HEAT TREAT AMS-2759/2
1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - HEAT TREAT AMS-2759/3
1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - HEAT TREAT AMS-2759/5
1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - HEAT TREAT AMS-5659
1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - HEAT TREAT AMS-H-6875
1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - HEAT TREAT E.S. 5.14.2 As per E.S. 19.8
1251 2018-03-31 Akron Steel Treating (5068) 336 Morgan Ave. Akron OH USA Steven Powell 330-773-8211 HT - STRESS RELIEF AMS-2759/11
1404 A-Lab Corporation (3083) 3050 Dryden Rd. Dayton OH USA John Williams 937-293-0333 AQS - QUALITY SYSTEM ISO 17025
1404 A-Lab Corporation (3083) 3050 Dryden Rd. Dayton OH USA John Williams 937-293-0333 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
1404 A-Lab Corporation (3083) 3050 Dryden Rd. Dayton OH USA John Williams 937-293-0333 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
1404 A-Lab Corporation (3083) 3050 Dryden Rd. Dayton OH USA John Williams 937-293-0333 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742
64 Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver [phone] AQS - QUALITY SYSTEM AC7004
64 Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver [phone] HT - HEAT TREAT AMS-2770
64 Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver [phone] HT - HEAT TREAT AMS-2771
64 Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver [phone] HT - HEAT TREAT AMS-2772
64 Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver [phone] HT - HEAT TREAT E.S. 13.3.64
64 Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver [phone] HT - HEAT TREAT E.S. 5.14.29
64 Alfe Heat Treating (4594) 979 Seville Rd Wadsworth OH USA Michelle Carver [phone] HT - HEAT TREAT MIL-H-6088
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 AQS - QUALITY SYSTEM AS 9100
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 CP01 - COATING, DRY FILM AS-5272
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 CP01 - COATING, DRY FILM MIL-PRF-46010
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 CP01 - COATING, PAINT APPLICATION MIL-F-18264
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 CP02 - TEMPER ETCH INSPECTION MM-5512
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 CP12 - PASSIVATION AMS-2700
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 CP12 - PASSIVATION ASTM-A-967
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 CP15 - PRE-PENETRANT ETCH AC7108/15
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 HT - STRESS RELIEF AMS-2759/11
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108
67 2018-10-31 All Metals Processing (3320) 8401 Standustrial Ave. Stanton CA USA Jim Olson (Quality Director) [phone] x127 NDT - INSPECTION, MAGNETIC PARTICLE MM-5537
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 AQS - QUALITY SYSTEM AS 9100
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP01 - COATING, DRY FILM AS5528
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP01 - COATING, DRY FILM MIL-PRF-46010
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP01 - COATING, DRY FILM MM-1920
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP01 - COATING, PAINT APPLICATION LGPS-1001
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP01 - COATING, PAINT APPLICATION MIL-F-18264
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.107
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) CP-0640
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.88
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
CP11 - CONVERSION COATING, STEEL, PHOSPHATE
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 MANG/ZN AMS-2481
CP11 - CONVERSION COATING, STEEL, PHOSPHATE
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 MANG/ZN MIL-DTL-16232
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP12 - PASSIVATION AMS-2700
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP12 - PASSIVATION ASTM-A-967
70 2018-01-31 Allen Aircraft Products, Inc. (4339) 4879 NEWTON FALLS RD. RAVENNA OH USA Ilene Weisberg [phone] x3443 CP12 - PASSIVATION E.S. 6.19
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 AQS - QUALITY SYSTEM AS 9100
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CMSP - GRINDING, CHROME LGPS-7000
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CMSP - GRINDING, CHROME MIL-STD-866
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CMSP - GRINDING, HVOF LGPS-7010
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP01 - COATING, PAINT APPLICATION LGPS-1001
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP01 - COATING, PAINT APPLICATION MIL-F-18264
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP02 - TEMPER ETCH INSPECTION AMS-2649
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP02 - TEMPER ETCH INSPECTION LGPS-3000
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP02 - TEMPER ETCH INSPECTION MIL-STD-867
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 Chromic acid anodize TYPE IB, CLASS 1 (Low Voltage Process)
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CADMIUM-TITANIUM LGPS-1103
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500
Page (6) of (111)
This document does not contain any export controlled technical data and is not subject to the regulations.
Printed: 3/2/2018
UTAS Landing Gear
Document 200 Approved Processors
DDTC Exp Date
Proc # PROCESSOR (as of March 2, 2018) ADDRESS CITY STATE COUNTRY QA MANAGER TELEPHONE SPECIAL PROCESS SPECIFICATION Limitations
See Note 6
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CHROME LGPS-1101
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP09 - PLATING, CHROME MIL-STD-1501
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP10 - ELECTROLESS PLATING, NICKEL AMS-2404
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP10 - ELECTROLESS PLATING, NICKEL LGPS-1108
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP12 - PASSIVATION AMS-2700 Solution type VI, VIII
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP12 - TITANIUM CLEANING LGPS-8003
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP13 - PLATING, BRUSH CADMIUM LGPS-1102
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP13 - PLATING, BRUSH CADMIUM MIL-STD-865
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CP14 - STRIPPING, HVOF LGPS-1300
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 CT - HVOF LGPS-1301
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - HEAT TREAT AMS-2759
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - HEAT TREAT AMS-2759/1
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - HEAT TREAT AMS-2759/2
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - HEAT TREAT AMS-2759/3 Except solution HT
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - HEAT TREAT AMS-2770
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - HEAT TREAT LGPS-2000
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 HT - STRESS RELIEF AMS 2759/11
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 NDT - PRE-PENETRANT ETCH AC7108/15
74 Alp Aviation (7440) ORGANIZE SAN.BOLG.8.CADDE Eskisehir TURKEY Murat UÇAR 90 222 211 70 37 SE - SHOT PEEN AMS-2430
76 Alphacasting Inc. 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 AQS - QUALITY SYSTEM AS 9100
76 Alphacasting Inc. 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 HT - HEAT TREAT AMS-2759
76 Alphacasting Inc. 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 HT - HEAT TREAT AMS-2771
76 Alphacasting Inc. 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
76 Alphacasting Inc. 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742
76 Alphacasting Inc. 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 WLD - WELDING AMS 2694
76 Alphacasting Inc. 391 St. Croix St.Laurent Quebec Canada William Wilson 514-748-7511 x252 WLD - WELDING AWS-D17.1
1405 Aluminum Finishing Co. (5672) 1575 Railroad Ave. Bridgeport CT USA Duane Bass 203-366-5871 AQS - QUALITY SYSTEM AC7004
1405 Aluminum Finishing Co. (5672) 1575 Railroad Ave. Bridgeport CT USA Duane Bass 203-366-5871 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29
1405 Aluminum Finishing Co. (5672) 1575 Railroad Ave. Bridgeport CT USA Duane Bass 203-366-5871 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
[phone] EXT. 5247, 5264,
79 2018-03-31 Aluminum Precision Products - Oxnard (4780) 1001 McWane Blvd. Oxnard CA USA Bennett Straker 5223 AQS - QUALITY SYSTEM AS 9100
[phone] EXT. 5247, 5264,
79 2018-03-31 Aluminum Precision Products - Oxnard (4780) 1001 McWane Blvd. Oxnard CA USA Bennett Straker 5223 HT - HEAT TREAT AMS-2772
[phone] EXT. 5247, 5264,
79 2018-03-31 Aluminum Precision Products - Oxnard (4780) 1001 McWane Blvd. Oxnard CA USA Bennett Straker 5223 HT - HEAT TREAT AMS-H-6088
80 2017-03-31 Aluminum Precision Products - Santa Ana (4666) 3333 W. Warner Ave. Santa Ana CA USA Kal Wong; Laila Hussain; Yesenia Romero [phone] AQS - QUALITY SYSTEM AS 9100
80 2017-03-31 Aluminum Precision Products - Santa Ana (4666) 3333 W. Warner Ave. Santa Ana CA USA Kal Wong; Laila Hussain; Yesenia Romero [phone] HT - HEAT TREAT AMS-2772
80 2017-03-31 Aluminum Precision Products - Santa Ana (4666) 3333 W. Warner Ave. Santa Ana CA USA Kal Wong; Laila Hussain; Yesenia Romero [phone] HT - HEAT TREAT AMS-H-6088
80 2017-03-31 Aluminum Precision Products - Santa Ana (4666) 3333 W. Warner Ave. Santa Ana CA USA Kal Wong; Laila Hussain; Yesenia Romero [phone] HT - HEAT TREAT MIL-H-6088
80 2017-03-31 Aluminum Precision Products - Santa Ana (4666) 3333 W. Warner Ave. Santa Ana CA USA Kal Wong; Laila Hussain; Yesenia Romero [phone] NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
80 2017-03-31 Aluminum Precision Products - Santa Ana (4666) 3333 W. Warner Ave. Santa Ana CA USA Kal Wong; Laila Hussain; Yesenia Romero [phone] NDT - INSPECTION, ULTRASONIC AMS-STD-2154
81 Alumiplate Inc. 8960 Springbrook Dr., Suite 105 Coon Rapids MN USA Jon Schulz [phone] AQS - QUALITY SYSTEM AQS No third-party registration of quality system.
81 Alumiplate Inc. 8960 Springbrook Dr., Suite 105 Coon Rapids MN USA Jon Schulz [phone] CP09 - PLATING, ALUMINUM (Alumiplate®) MIL-DTL-83488 PN's 274-231 and 274-233 only.
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] AQS - QUALITY SYSTEM AS 9100
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] CMSP - GRINDING, CHROME LGPS-7000
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] CMSP - GRINDING, CHROME MIL-STD-866
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] CMSP - GRINDING, HVOF LGPS-7010
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] CP02 - TEMPER ETCH INSPECTION BP-108
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] CP02 - TEMPER ETCH INSPECTION CP-0350
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] CP02 - TEMPER ETCH INSPECTION LGPS-3000
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] CP02 - TEMPER ETCH INSPECTION MIL-STD-867
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] HT - STRESS RELIEF AMS-2759/11 650 degrees F maximum
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] HT - STRESS RELIEF AMS-2759/9 650 degrees F maximum
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] HT - STRESS RELIEF AMS-H-6875 650 degrees F maximum
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] HT - STRESS RELIEF CPC-6203 650 degrees F maximum
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108
82 2016-03-31 American Aircraft Parts Mfg. (3332) 44801 Centre Court East Clinton Township MI USA Tom Ellis [phone] NDT - INSPECTION, MAGNETIC PARTICLE MM-5537
1589 2018-08-31 American Testing Services LTD (4187) 2000 Old Byers Rd. Miamisburg Ohio USA Diedra Howell 937-298-9390 AQS - QUALITY SYSTEM AS 9100
1589 2018-08-31 American Testing Services LTD (4187) 2000 Old Byers Rd. Miamisburg Ohio USA Diedra Howell 937-298-9390 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
1589 2018-08-31 American Testing Services LTD (4187) 2000 Old Byers Rd. Miamisburg Ohio USA Diedra Howell 937-298-9390 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
1589 2018-08-31 American Testing Services LTD (4187) 2000 Old Byers Rd. Miamisburg Ohio USA Diedra Howell 937-298-9390 NDT - INSPECTION, RADIOGRAPHIC ASTM-E-1742
1589 2018-08-31 American Testing Services LTD (4187) 2000 Old Byers Rd. Miamisburg Ohio USA Diedra Howell 937-298-9390 NDT - INSPECTION, ULTRASONIC AMS-STD-2154
1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 AQS - QUALITY SYSTEM AC7004
1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625
1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625
1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625
1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625
1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625
1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
1406 American Tinning & Galvanizing Co. (5255) 552 West 12th St. Erie PA USA Lori Hess 814-456-7053 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
1407 AMZ Manufacturing (8745) 2206 Pennsylvania Ave. York PA USA Michael Billman 717-848-2565 AQS - QUALITY SYSTEM AC7004
1407 AMZ Manufacturing (8745) 2206 Pennsylvania Ave. York PA USA Michael Billman 717-848-2565 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
1311 Ankit Fasteners Pvt Ltd NO 297 HARAGADDE VILLAGE Bangalore Karnataka India LG Bernard A. Stadler AWB Michelle Field AQS - QUALITY SYSTEM AS 9100
1311 Ankit Fasteners Pvt Ltd NO 297 HARAGADDE VILLAGE Bangalore Karnataka India LG Bernard A. Stadler AWB Michelle Field CP09 - PLATING, SILVER AMS-2411
1311 Ankit Fasteners Pvt Ltd NO 297 HARAGADDE VILLAGE Bangalore Karnataka India LG Bernard A. Stadler AWB Michelle Field CP12 - PASSIVATION AMS-2700
1311 Ankit Fasteners Pvt Ltd NO 297 HARAGADDE VILLAGE Bangalore Karnataka India LG Bernard A. Stadler AWB Michelle Field HT - HEAT TREAT AMS-2759/1
1311 Ankit Fasteners Pvt Ltd NO 297 HARAGADDE VILLAGE Bangalore Karnataka India LG Bernard A. Stadler AWB Michelle Field HT - HEAT TREAT AMS-2759/2
1311 Ankit Fasteners Pvt Ltd NO 297 HARAGADDE VILLAGE Bangalore Karnataka India LG Bernard A. Stadler AWB Michelle Field HT - HEAT TREAT AMS-2759/3
1311 Ankit Fasteners Pvt Ltd NO 297 HARAGADDE VILLAGE Bangalore Karnataka India LG Bernard A. Stadler AWB Michelle Field HT - HEAT TREAT AMS-2759/5
1311 Ankit Fasteners Pvt Ltd NO 297 HARAGADDE VILLAGE Bangalore Karnataka India LG Bernard A. Stadler AWB Michelle Field HT - HEAT TREAT AMS-2770
1311 Ankit Fasteners Pvt Ltd NO 297 HARAGADDE VILLAGE Bangalore Karnataka India LG Bernard A. Stadler AWB Michelle Field HT - HEAT TREAT AMS-2801
1311 Ankit Fasteners Pvt Ltd NO 297 HARAGADDE VILLAGE Bangalore Karnataka India LG Bernard A. Stadler AWB Michelle Field NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
Page (7) of (111)
This document does not contain any export controlled technical data and is not subject to the regulations.
Printed: 3/2/2018
UTAS Landing Gear
Document 200 Approved Processors
DDTC Exp Date
Proc # PROCESSOR (as of March 2, 2018) ADDRESS CITY STATE COUNTRY QA MANAGER TELEPHONE SPECIAL PROCESS SPECIFICATION Limitations
See Note 6
1311 Ankit Fasteners Pvt Ltd NO 297 HARAGADDE VILLAGE Bangalore Karnataka India LG Bernard A. Stadler AWB Michelle Field NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson [phone] AQS - QUALITY SYSTEM AC7004
89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson [phone] CP08 - ANODIZE ALUMINUM - HARD (TYPE III) AMS-2469
89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson [phone] CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3
89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson [phone] CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) AMS-2471
89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson [phone] CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2
89 Anodic Inc. (3038) Route 111 Stevenson CT USA Randi Jackson [phone] CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire QuebecC Canada Marcel Daviau [phone] x36 AQS - QUALITY SYSTEM AS 9100
90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire QuebecC Canada Marcel Daviau [phone] x36 CP01 - COATING, DRY FILM MIL-PRF-46010
90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire QuebecC Canada Marcel Daviau [phone] x36 CP01 - COATING, PAINT APPLICATION LGPS-1001
90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire QuebecC Canada Marcel Daviau [phone] x36 CP01 - COATING, PAINT APPLICATION MIL-F-18264
90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire QuebecC Canada Marcel Daviau [phone] x36 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1
90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire QuebecC Canada Marcel Daviau [phone] x36 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire QuebecC Canada Marcel Daviau [phone] x36 CP12 - PASSIVATION AMS-2700
90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire QuebecC Canada Marcel Daviau [phone] x36 CP12 - PASSIVATION ASTM-A-967
90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire QuebecC Canada Marcel Daviau [phone] x36 CP15 - PRE-PENETRANT ETCH AC7108/15
90 Anodizing & Paint TNM Inc. (4687) 21 Aviation Point Claire QuebecC Canada Marcel Daviau [phone] x36 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
1408 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 AQS - QUALITY SYSTEM AC7004
1408 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP01 - COATING, DRY FILM MIL-PRF-46010
1408 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625
1408 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
1408 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
1408 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-13924
1408 Anoplate Corp. (4719) 459 Pulaski St. Syracuse NY USA Christine Koch 315-471-6143 CP12 - PASSIVATION AMS-2700
1456 Applied Process, Inc. (8078) 12202 Newburgh Rd. Livonia MI USA Mark Fore [phone] AQS - QUALITY SYSTEM AC7004
1456 Applied Process, Inc. (8078) 12202 Newburgh Rd. Livonia MI USA Mark Fore [phone] HT - HEAT TREAT E.S. 5.14.2 As per E.S. 19.8
98 Applus RTD Canada - Burlington 4325 Harvester Road, Unit 13 Burlington Ontario Canada Kris Krishnamoorthy 905-331-4305 AQS - QUALITY SYSTEM AS 9100
98 Applus RTD Canada - Burlington 4325 Harvester Road, Unit 13 Burlington Ontario Canada Kris Krishnamoorthy 905-331-4305 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
98 Applus RTD Canada - Burlington 4325 Harvester Road, Unit 13 Burlington Ontario Canada Kris Krishnamoorthy 905-331-4305 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
99 Applus RTD Canada - Schomberg 71 Proctor Rd. Schomberg Ontario Canada Kris Krishnamoorthy 905-331-4305 AQS - QUALITY SYSTEM AS 9100
99 Applus RTD Canada - Schomberg 71 Proctor Rd. Schomberg Ontario Canada Kris Krishnamoorthy 905-331-4305 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
99 Applus RTD Canada - Schomberg 71 Proctor Rd. Schomberg Ontario Canada Kris Krishnamoorthy 905-331-4305 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
office [phone]; mobile 216-
63 Arconic Forgings and Extrusions (3316) 1600 Harvard Ave CLEVELAND OH USA Heather Watson 905-5667 AQS - QUALITY SYSTEM AS 9100
office [phone]; mobile 216-
63 Arconic Forgings and Extrusions (3316) 1600 Harvard Ave CLEVELAND OH USA Heather Watson 905-5667 HT - HEAT TREAT AMS-2770
office [phone]; mobile 216-
63 Arconic Forgings and Extrusions (3316) 1600 Harvard Ave CLEVELAND OH USA Heather Watson 905-5667 HT - HEAT TREAT AMS-2772
office [phone]; mobile 216-
63 Arconic Forgings and Extrusions (3316) 1600 Harvard Ave CLEVELAND OH USA Heather Watson 905-5667 HT - HEAT TREAT E.S. 5.14.26
office [phone]; mobile 216-
63 Arconic Forgings and Extrusions (3316) 1600 Harvard Ave CLEVELAND OH USA Heather Watson 905-5667 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
office [phone]; mobile 216-
63 Arconic Forgings and Extrusions (3316) 1600 Harvard Ave CLEVELAND OH USA Heather Watson 905-5667 NDT - INSPECTION, ULTRASONIC AMS-STD-2154
office [phone]; mobile 216-
63 Arconic Forgings and Extrusions (3316) 1600 Harvard Ave CLEVELAND OH USA Heather Watson 905-5667 NDT - INSPECTION, ULTRASONIC CPC-9104
office [phone]; mobile 216-
63 Arconic Forgings and Extrusions (3316) 1600 Harvard Ave CLEVELAND OH USA Heather Watson 905-5667 NDT - PRE-PENETRANT ETCH AC7108/15
1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 AQS - QUALITY SYSTEM AS 9100
1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 CP12 - PASSIVATION AMS-2700
1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 CP12 - TITANIUM CLEANING ASTM-B-600 At Fullerton facility only.
1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 HT - HEAT TREAT AMS-2759/3
1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 HT - HEAT TREAT AMS-2769
1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 HT - HEAT TREAT AMS-2801
1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 HT - HEAT TREAT AMS-5629
1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 HT - HEAT TREAT AMS-H-81200
1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 HT - STRESS RELIEF AMS-2759/11
1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
1323 Arconic Global Fasteners & Rings, Inc. - City of Industry (4027) 135 N Unruh Ave City of Industry CA USA Thomas Johnson 714-449-4340 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 AQS - QUALITY SYSTEM AS 9100
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - HEAT TREAT AMS-2759/1
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - HEAT TREAT AMS-2759/2
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - HEAT TREAT AMS-2759/3
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - HEAT TREAT AMS-2759/4
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - HEAT TREAT AMS-2759/5
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - HEAT TREAT AMS-2759/6
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - HEAT TREAT AMS-2759/7
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - HEAT TREAT AMS-2770
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - HEAT TREAT AMS-H-6088
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - HEAT TREAT AMS-H-6875
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - HEAT TREAT AMS-H-81200
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - HEAT TREAT AMS-S-6090
2 2014-12-31 Aremac Heat Treating (3044) 330 Ninth Ave. City Of Industry CA USA William Duarte [phone] ext. 205 HT - STRESS RELIEF AMS-2759/11
6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 AQS - QUALITY SYSTEM JISQ9100
Approval limited to chrome grinding on stainless steel substrate
6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CMSP - GRINDING, CHROME MIL-STD-866 only.
6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1
6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3
6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP09 - PLATING, CHROME AMS-2460
6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP09 - PLATING, CHROME AMS-QQ-C-320
6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP09 - PLATING, CHROME MIL-STD-1501
6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP12 - PASSIVATION AMS-2700
6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP12 - PASSIVATION ASTM-A-967
6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 CP15 - PRE-PENETRANT ETCH AC7108/15
6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
6 Asahi Kinzoku Kogyo Co. Ltd. - Anpachi (5018) 4851-4 Maki Anpachi-cho Anpachi-gun Gifu-ken Japan Eikichirou Nishimatsu 81-584-64-5061 SE - SHOT PEEN AMS-2430
7 Asahi Kinzoku Kogyo Co. Ltd. (Kyoto) 45, Nagata-cho, Kishoin, Minami-Ku Kyoto Japan Eikichirou Nishimatsu 81-584-645061 AQS - QUALITY SYSTEM JISQ9100
7 Asahi Kinzoku Kogyo Co. Ltd. (Kyoto) 45, Nagata-cho, Kishoin, Minami-Ku Kyoto Japan Eikichirou Nishimatsu 81-584-645061 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
Page (8) of (111)
This document does not contain any export controlled technical data and is not subject to the regulations.
Printed: 3/2/2018
UTAS Landing Gear
Document 200 Approved Processors
DDTC Exp Date
Proc # PROCESSOR (as of March 2, 2018) ADDRESS CITY STATE COUNTRY QA MANAGER TELEPHONE SPECIAL PROCESS SPECIFICATION Limitations
See Note 6
7 Asahi Kinzoku Kogyo Co. Ltd. (Kyoto) 45, Nagata-cho, Kishoin, Minami-Ku Kyoto Japan Eikichirou Nishimatsu 81-584-645061 CP09 - PLATING, CHROME AMS-2460
7 Asahi Kinzoku Kogyo Co. Ltd. (Kyoto) 45, Nagata-cho, Kishoin, Minami-Ku Kyoto Japan Eikichirou Nishimatsu 81-584-645061 CP09 - PLATING, CHROME AMS-QQ-C-320
7 Asahi Kinzoku Kogyo Co. Ltd. (Kyoto) 45, Nagata-cho, Kishoin, Minami-Ku Kyoto Japan Eikichirou Nishimatsu 81-584-645061 CP09 - PLATING, CHROME MIL-STD-1501
7 Asahi Kinzoku Kogyo Co. Ltd. (Kyoto) 45, Nagata-cho, Kishoin, Minami-Ku Kyoto Japan Eikichirou Nishimatsu 81-584-645061 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] AQS - QUALITY SYSTEM AS 9100
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CMSP - GRINDING, CHROME LGPS-7000
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CMSP - GRINDING, CHROME MIL-STD-866
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CP01 - COATING, PAINT APPLICATION LGPS-1001
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CP01 - COATING, PAINT APPLICATION MIL-F-18264
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CP02 - TEMPER ETCH INSPECTION LGPS-3000
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE IB) MIL-A-8625
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CP09 - PLATING, CHROME AMS-2460
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] CP12 - PASSIVATION AMS-2700
1110 Asashita Mekki Co., Ltd. 1843-7 Yokoe-machi Hakusan City Ishikawa Japan Mitsuo Ishiura [phone] HT - STRESS RELIEF AMS 2759/11 100-500 degrees C or 212-932 degrees F
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 AQS - QUALITY SYSTEM AS 9100
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP01 - COATING, PAINT APPLICATION LGPS-1001
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP01 - COATING, PAINT APPLICATION MIL-F-18264
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP02 - TEMPER ETCH INSPECTION LGPS-3000
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP12 - TITANIUM CLEANING LGPS-8003
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP13 - PLATING, BRUSH CADMIUM LGPS-1102
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 CP15 - PRE-PENETRANT ETCH AC7108/15
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 HT - STRESS RELIEF AMS-2759
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 HT - STRESS RELIEF AMS-2759/11
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 HT - STRESS RELIEF AMS-H-6875
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 SE - ROTOPEEN AMS-2590
103 ASCO Industries (5321) WEIVELDLAAN 2 ZAVENTEM Bruxelles BELGIUM Mr. Michel Moeskops 32 2 716 08 39 SE - SHOT PEEN AMS-2430
104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 AQS - QUALITY SYSTEM AC7004
104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CMSP - GRINDING, CHROME LGPS-7000
104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CMSP - GRINDING, CHROME MIL-STD-866
104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CMSP - GRINDING, HVOF AMS-2449
104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CMSP - GRINDING, HVOF LGPS-7010
104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CT - HVOF AMS-2447
104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CT - HVOF AMS-2448
104 2017-06-30 Asko Industrial Repair (9435) 12128 Cyrus Way Mukilteo WA USA John Franks 425-740-2993 CT - HVOF LGPS-1301 LGMS9011 Type II only (DSS9000-018)
105 2016-06-30 Asko Processing - Color Tech Div. (4626) 6304 215th St S.W Mountlake Terrace WA USA Chuckie Hale 425-275-9420 AQS - QUALITY SYSTEM AC7004
105 2016-06-30 Asko Processing - Color Tech Div. (4626) 6304 215th St S.W Mountlake Terrace WA USA Chuckie Hale 425-275-9420 CP01 - COATING, DRY FILM MIL-PRF-46010
105 2016-06-30 Asko Processing - Color Tech Div. (4626) 6304 215th St S.W Mountlake Terrace WA USA Chuckie Hale 425-275-9420 CP01 - COATING, PAINT APPLICATION BR-167
105 2016-06-30 Asko Processing - Color Tech Div. (4626) 6304 215th St S.W Mountlake Terrace WA USA Chuckie Hale 425-275-9420 CP01 - COATING, PAINT APPLICATION LGPS-1001
105 2016-06-30 Asko Processing - Color Tech Div. (4626) 6304 215th St S.W Mountlake Terrace WA USA Chuckie Hale 425-275-9420 CP01 - COATING, PAINT APPLICATION MIL-F-18264
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] AQS - QUALITY SYSTEM AC7004
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP02 - TEMPER ETCH INSPECTION AMS-2649
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP02 - TEMPER ETCH INSPECTION LGPS-3000
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP02 - TEMPER ETCH INSPECTION MIL-STD-867
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, CADMIUM (BRIGHT/LHE) LGPS-1100
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, CADMIUM (BRIGHT/LHE) MIL-STD-870
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, CADMIUM-TITANIUM MIL-STD-1500
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, CHROME AMS-2438
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, CHROME AMS-2460
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, CHROME AMS-QQ-C-320
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, CHROME LGPS-1101
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, CHROME MIL-STD-1501
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, COPPER AMS-2418
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, NICKEL AMS-2424
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, NICKEL AMS-QQ-N-290
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP09 - PLATING, SILVER ASTM-B-700
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP10 - ELECTROLESS PLATING, NICKEL AMS-2404
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP11 - CONVERSION COATING, ALUMINUM MM-5516
CP11 - CONVERSION COATING, STEEL, PHOSPHATE
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] MANG/ZN AMS-2481
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP12 - PASSIVATION AMS-2700
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP12 - PASSIVATION ASTM-A-967
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP13 - PLATING, BRUSH CADMIUM MIL-STD-865
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP14 - STRIPPING, HVOF LGPS-1300
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] CP15 - PRE-PENETRANT ETCH AC7108/15
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] HT - STRESS RELIEF AMS 2759/11 Stress relief up to 950°F
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] NDT - INSPECTION, MAGNETIC PARTICLE CPC-9108
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] SE - SHOT PEEN AMS-2430
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] SE - SHOT PEEN BP-105
106 2016-06-30 Asko Processing, Inc. (3049) 434 N. 35th St. Seattle WA USA John Franks [phone] SE - SHOT PEEN CPC-6400
107 Astro Aluminum Treating Co. 11040 PALMER AVENUE SOUTH GATE CA USA Paul Blaisdell [phone] AQS - QUALITY SYSTEM AC7004
Page (9) of (111)
This document does not contain any export controlled technical data and is not subject to the regulations.
Printed: 3/2/2018
UTAS Landing Gear
Document 200 Approved Processors
DDTC Exp Date
Proc # PROCESSOR (as of March 2, 2018) ADDRESS CITY STATE COUNTRY QA MANAGER TELEPHONE SPECIAL PROCESS SPECIFICATION Limitations
See Note 6
107 Astro Aluminum Treating Co. 11040 PALMER AVENUE SOUTH GATE CA USA Paul Blaisdell [phone] HT - HEAT TREAT AMS-2770
107 Astro Aluminum Treating Co. 11040 PALMER AVENUE SOUTH GATE CA USA Paul Blaisdell [phone] HT - HEAT TREAT AMS-2772
107 Astro Aluminum Treating Co. 11040 PALMER AVENUE SOUTH GATE CA USA Paul Blaisdell [phone] HT - HEAT TREAT AMS-H-6088
1458 Astro Manufacturing & Design (10406) 34459 Curtis Blvd. Eastlake OH USA William Roberts 440-946-8171 ext 1602 AQS - QUALITY SYSTEM AC7004
1458 Astro Manufacturing & Design (10406) 34459 Curtis Blvd. Eastlake OH USA William Roberts 440-946-8171 ext 1602 CP01 - COATING, PAINT APPLICATION MIL-F-18264
LG [phone] AWB (414) 747-
504 ATI Forged Products (3297) 5481 S Packard Ave. Cudahy WI USA David Eickhoff 2611 AQS - QUALITY SYSTEM AS 9100
LG [phone] AWB (414) 747-
504 ATI Forged Products (3297) 5481 S Packard Ave. Cudahy WI USA David Eickhoff 2611 HT - HEAT TREAT AMS-H-6875
LG [phone] AWB (414) 747-
504 ATI Forged Products (3297) 5481 S Packard Ave. Cudahy WI USA David Eickhoff 2611 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
LG [phone] AWB (414) 747-
504 ATI Forged Products (3297) 5481 S Packard Ave. Cudahy WI USA David Eickhoff 2611 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
LG [phone] AWB (414) 747-
504 ATI Forged Products (3297) 5481 S Packard Ave. Cudahy WI USA David Eickhoff 2611 NDT - PRE-PENETRANT ETCH AC7108/15
939 ATI ZKM Forging sp. z o.o. (8184) ul. Grabskiego 54 Stalowa Wola Sub Carpatian Poland Marlena Janiec 0048 15 8135097 AQS - QUALITY SYSTEM AS 9100
939 ATI ZKM Forging sp. z o.o. (8184) ul. Grabskiego 54 Stalowa Wola Sub Carpatian Poland Marlena Janiec 0048 15 8135097 HT - HEAT TREAT AMS-2759/2
939 ATI ZKM Forging sp. z o.o. (8184) ul. Grabskiego 54 Stalowa Wola Sub Carpatian Poland Marlena Janiec 0048 15 8135097 HT - HEAT TREAT AMS-H-6875
939 ATI ZKM Forging sp. z o.o. (8184) ul. Grabskiego 54 Stalowa Wola Sub Carpatian Poland Marlena Janiec 0048 15 8135097 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
152 Aubert & Duval (5258) B.P. 1 LES ANCIZES-COMP NEUILLY Auvergne FRANCE Christophe Petit 33(0)473673642 AQS - QUALITY SYSTEM AS 9100
152 Aubert & Duval (5258) B.P. 1 LES ANCIZES-COMP NEUILLY Auvergne FRANCE Christophe Petit 33(0)473673642 HT - HEAT TREAT AMS-H-6875
152 Aubert & Duval (5258) B.P. 1 LES ANCIZES-COMP NEUILLY Auvergne FRANCE Christophe Petit 33(0)473673642 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
152 Aubert & Duval (5258) B.P. 1 LES ANCIZES-COMP NEUILLY Auvergne FRANCE Christophe Petit 33(0)473673642 NDT - INSPECTION, ULTRASONIC AMS-STD-2154
355 Babcock Welding Co., Inc. (5469) 2325 N. Merced Avenue South El Monte CA USA Rosie Garcia [phone] AQS - QUALITY SYSTEM AC7004
355 Babcock Welding Co., Inc. (5469) 2325 N. Merced Avenue South El Monte CA USA Rosie Garcia [phone] WLD - WELDING AMS-STD-2219
355 Babcock Welding Co., Inc. (5469) 2325 N. Merced Avenue South El Monte CA USA Rosie Garcia [phone] WLD - WELDING CPC-5204
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 AQS - QUALITY SYSTEM AC7004
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP01 - COATING, DRY FILM MIL-PRF-46010
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP01 - COATING, PAINT APPLICATION MIL-F-18264
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP08 - ANODIZE ALUMINUM - CHROMIC (TYPE I) MIL-A-8625 type 1
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625 type 3
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625 type 2
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP09 - PLATING, CADMIUM (BRIGHT/LHE) AMS-QQ-P-416
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP09 - PLATING, COPPER AMS-2418
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP09 - PLATING, NICKEL AMS-2403
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP09 - PLATING, SILVER ASTM-B-700
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP10 - ELECTROLESS PLATING, NICKEL AMS-C-26074
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DTL-16232
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP12 - PASSIVATION AMS-2700
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP12 - PASSIVATION ASTM-A-967
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 CP15 - PRE-PENETRANT ETCH AC7108/15
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 HT - STRESS RELIEF AMS-2759/11 1000'F maximum.
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
170 2018-10-31 Barry Avenue Plating (3067) 2210 Barry Ave. Los Angeles CA USA Laura Curtis [phone] X 222 NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 AQS - QUALITY SYSTEM AC7004
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP01 - COATING, DRY FILM MIL-PRF-46010
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP01 - COATING, PAINT APPLICATION MIL-F-18264
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) E.S. 6.45 Excluding 2024 aluminum
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - HARD (TYPE III) MIL-A-8625
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - HARD with TEFLON AMS-2482
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - HARD with TEFLON E.S. 6.107 Excluding 2024 aluminum
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.2
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) E.S. 6.16.4
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE II) MIL-A-8625
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP08 - ANODIZE ALUMINUM - SULFURIC (TYPE IIB) MIL-A-8625
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP11 - CONVERSION COATING, ALUMINUM E.S. 6.29
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP11 - CONVERSION COATING, ALUMINUM MIL-DTL-5541
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP12 - PASSIVATION AMS-2700
1330 B-D Industries, Inc. (3847) 1715 FIELDHOUSE AVE Elkhart IN USA Jim Denton 574-295-1420 CP12 - PASSIVATION E.S. 6.19
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] AQS - QUALITY SYSTEM AC7004
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT AMS-2759/1
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT AMS-2759/2
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT AMS-2759/3
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT AMS-2759/4
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT AMS-2759/5
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT AMS-2759/6
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT AMS-2759/7
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT AMS-2770
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT AMS-2772
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT AMS-H-6875
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT AMS-H-81200
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT BP-106
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT BP-109
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT BP-118
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT BP-123
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT CP-0710
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT MM-5744
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT MMC-125
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT MMC-151
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT MMC-160
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT MMC-198
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT MMC-207
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT MMC-211
174 Bennett Heat Treat (3071) 690 Ferry St. Newark NJ USA John Quaglia [phone] HT - HEAT TREAT MMC-268
176 B-G Detection Services (4490) 9235 Glen Oaks Blvd. Sun Valley CA USA Robert Greene [phone] AQS - QUALITY SYSTEM AC7004
176 B-G Detection Services (4490) 9235 Glen Oaks Blvd. Sun Valley CA USA Robert Greene [phone] CP12 - PASSIVATION AMS-2700
176 B-G Detection Services (4490) 9235 Glen Oaks Blvd. Sun Valley CA USA Robert Greene [phone] CP12 - PASSIVATION ASTM-A-967
176 B-G Detection Services (4490) 9235 Glen Oaks Blvd. Sun Valley CA USA Robert Greene [phone] CP15 - PRE-PENETRANT ETCH AC7108/15
176 B-G Detection Services (4490) 9235 Glen Oaks Blvd. Sun Valley CA USA Robert Greene [phone] NDT - INSPECTION, LIQUID PENETRANT ASTM-E-1417
176 B-G Detection Services (4490) 9235 Glen Oaks Blvd. Sun Valley CA USA Robert Greene [phone] NDT - INSPECTION, MAGNETIC PARTICLE ASTM-E-1444
1473 Black Oxide Industries Inc 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto AQS - QUALITY SYSTEM AC7004
1473 Black Oxide Industries Inc 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto CP11 - CONVERSION COATING, STEEL, BLACK OXIDE AMS-2485
1473 Black Oxide Industries Inc 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-DLT-13924
1473 Black Oxide Industries Inc 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto CP11 - CONVERSION COATING, STEEL, BLACK OXIDE MIL-F-495
1473 Black Oxide Industries Inc 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto CP12 - PASSIVATION AMS-2700
1473 Black Oxide Industries Inc 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto CP12 - PASSIVATION ASTM-A-967
1473 Black Oxide Industries Inc 1745 Orangethorpe Park Anahiem CA USA Ernesto Nieto HT - STRESS RELIEF AMS-2759/11
Page (10) of (111)
This document does not contain any export controlled technical data and is not subject to the regulations.