Network Rail Ancillaries PPE Catalogue

37 Pages·2016·5.11 MB·English

ISSUE 04: September 2016
Network Rail Ancillaries
PPE Catalogue
brought to you by
Welcome to the Network Rail Ancillaries
Protective Clothing Catalogue
This is the Network Rail catalogue for PPE ancillaries, which displays
the range of products available on iproc.
This catalogue offers a broad range of products that have been
selected by the workforce safety committee for their high quality,
fitness for purpose, suitability and comfort to enable you to have the
equipment needed to do your job.
PPE is the last line of defence which may not always prevent an
injury, but when worn correctly and maintained will minimise the
severity. Network Rail also continuously works to eliminate hazards
and reduce the likelihood of any occurrences so everyone goes
home safe everyday.
All of the items in this catalogue are supplied by Bunzl Greenhams
and are available to order via iproc, the Network Rail online ordering
system. Once the order has been placed, if any support is required
to check on progress or resolve any issues, this is provided by the
Network Rail help desk who can be contacted via these methods.
For more information please contact:
Phone [phone]
Email [email protected]
Contents
Personal Protective Equipment
Special Hazard Workwear 4-5
Workwear 6
Hand Protection 7-14
Safety Footwear 15-16
Respiratory Protection 17-19
Eye & Face Protection 20-24
Head Protection 25-29
Hearing Protection 30-32
Fall Arrest 33
Contractors Site Equipment
Site Equipment 34-36
Special Hazard Workwear
3M 4515 Disposable Coverall Kleenguard A10 Blue
• Protects skin from hazardous dusts and Hooded Coverall
limited liquid splashes Colour: NLOaGOv: PyOS ITBIVEl Cuyaen &K MCP Barag nJuden eA n5s, s2te0ta1s2
• Elasticated hood, ankles, cuffs and waist Size: S- 3XL
• 2-way zip with storm flap Code: 383009
• Breathable fabric with low lint
Colour: Hi Viz Orange
Size: M-2XL
Code: 382054
KeepCLEAN Disposable
Hooded Coverall
• Light protection from dirt and
grease
• Made from 100% polypropylene
with zip front
• Elasticated hood and cuffs
Colour: White
Size: M-3XL
Code: 382020
4 Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement
Special Hazard Workwear
Special Hazard Workwear
Kleenguard A20+ Type 5/6 Breathable
Hooded Coveralls
CONFORMSLO GTO:O POS IETIVNE Cy a3n &K 4MCP Barag0 nJuden eA n5s, s 2te0ta1s2COMPLEX DESIGN TYPE 5 & 6
AND EN 1149-1
• Breathable particle protection coverall
• Protection against particles, fibres and chemical
splash
• Durable SMS fabric keeps out 99% of particles larger
than 1 micron (I>O.M Aloxite test)
• Triple stitched internal seams protect against tearing.
Breathable fabric reduces the risk of heat stress
• Specially designed body, hood and waist for comfort
and safety
• Silicone free for critical areas
• EN1073-2 approved for radioactive dust protection
• 97100/10/20/30/40/50
Colour: White
Size: S, M, L, XL. XXL, XXXL
Code: 383018
Kleenguard A40 Type 5/6
Hooded Coveralls
• Ultra stronLOgGO : PfOaSITbIVEr Ciycan &aK MCP Banrag nJuden eA dn5s, s2te0ta1s2 strong triple
stitched seams help protect against
tearing
• Anti-static fabric EN1149-1 helps reduce
the risk of sparking which could cause
danger
• Colour coded badge, easily identified
protection
• Process protection for critical areas
• Ultra low-lint performance, film laminate
and internal seams significantly reduce
levels of ‘lint’
• Silicone free, ideal for paint-spraying
• Generous cut to the arms and legs for
freedom of movement
• Elasticated cuffs, ankles and waist
improves garment fit and worker safety
• Full length zip, eases ability to get in/out
of garment
• Hood designed for mask use and
freedom of movement
• 9790/1/2/3/4/5
Colour: White
Size: S, M, L, XL, XXL, XXXL
Code: 383050
5 Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement
Workwear
Sioen Chemflex Apron Shin Guards
• 8000 100% polyester knitting • Designed for protection when using a trimmer
with PVC/PU coating 390gm2 or brushcutter
Size: 75 x 100cm • Polyethylene outer shell covers entire lower leg
Colour: Green • Soft, cushion inside molds to shape of leg
Code: 300072 • Lightweight and comfortable to wear
• Quick and easy to put on and off with quick
release adjustable buckle straps
Size: 75 x 100cm
Colour: Black
Code: 504003
Impacto Rubber Knee Pad Welders Leather Gaiter Spat
• Anti-slip ribbed surface • Durable 80% polyester, 20% cotton with twill finish
• Easy on/ off replaceable and • Genuine Teflon coating repels dirt, grease & water
adjustable 1” rubber straps fasten to • Twin needle stitching & bar tacked at stress points
plastic buttons • Double press stud & single button fastening with zip fly
• Great for heavy duty industrial and • Knee pad pockets (knee pads not included)
construction applications • Elasticated waistband
• Heavy duty Size: 30-48”
• 885-00 Colour: High Visibility Orange
Code: 292221 Code: 292225
6 Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement
Safety Footwear
Hand
Protection
Health & Safety
Hands at work are extremely vulnerable to a
wide range of hazards which include cuts,
blows, chemical attack and temperature
extremes. With industry’s increasingly complex
and sensitive manufacturing and handling
processes, there is a growing insistence on the
use of “job fitted” gloves that meet each user’s
specific requirements; hence our offering of a
wider and more comprehensive range of gloves
in this section – in excess of 200 different types
and styles from which to choose.
Maintenance
Contaminated and worn gloves may fail to
protect the hands from the very hazard they
were designed for. Effective protection is
maintained by regular replacement of the
gloves. Check the condition of the gloves, inside
and out.
Buying Guide EN 374 – This standard specifies the capability Mechanical Hazards: EN 388
of gloves to protect the user against chemicals Performance
and/or micro-organisms. Level
European Standards
(a) Abrasion resistance 0-4
(b) Blade-cut resistance 0-5
Implies that the gloves comply with
EN 511 – This standard applies to gloves (c) Tear resistance 0-4
the basic requirements laid down by the EEC
which protect the hands against convective (d) Puncture resistance 0-4
directive: Personal Protective Equipment. and contact cold.
EN 511: Cold
Simple Design (Category 1) EN 407 – This standard specifies thermal Performance
For areas of ‘minimal risk’ where the effects performance for protective gloves against heat Level
of not wearing a glove are easily reversible or and/or fire. (a) Convective cold 0-4
(b) Contact cold 0-4
superficial. Such products are self-certified. EN 659 – This standard defines performance
(c) Water proofness 0-1
requirements for gloves designed to protect fire
Intermediate Design (Category 2)
fighters against heat and flames.
Thermal Hazards: EN 407
For areas of specific risk i.e. mechanical risks.
Such products will have been EC type tested EN 421 – This standard lays down test Performance
methods and performance criteria for gloves Level
against European test methods and certified
offering protection against ionising radiation (a) Burning behaviour 0-4
by a notified body.
and radioactive contamination. (b) Contact heat 0-4
Complex Design (Category 3) (c) Convective heat 0-4
EN 455 – Medical gloves for single use
(d) Radiant heat 0-4
For areas/applications that can seriously or
irreversibly harm the health. Such products, If a glove is to be used for food handling, it (e) S mall splashes of
is required to carry either the words ‘for food molten metal 0-4
in addition to the CE type test, will also have
to be either produced under an approved use’ or this symbol. (f) L arge splashes of
quality system OR be type tested on an molten metal 0-4
annual basis.
Contact Heat EN 407 Contact Threshold
EN 388 – This standard applies to all kinds Performance Temperature °C Time Seconds
of protective gloves giving protection from A sample is taken from the palm area of a glove. Level
mechanical risks, in respect of physical The outside of the glove is put on a hot surface and 1 100 >15
problems caused by abrasion, blade cut, the temperature of the inside of the glove is then 2 250 >15
puncture or tearing. This standard also monitored. The temperature on the inside of the
covers risk of electrostatic discharge. glove must take 15 seconds or more to rise by 10°C 3 350 >15
from room temperature. 4 500 >15
Hand Protection
Glove Chainsaw Dynamic Oregon Chainsaw
Cut Protection Stihl Protective Glove
CONFORMS TO EN 166 1.F CONFORMS TO EN 381-7
• Individual lens angle adjustment • Yellow hide palm with red
• Non-slip rubber arm grips nylon water repellent back and
• Scratch-resistant lens knitted cuff
Colour: Clear lens, blue frame Colour: S, M, L, XL
Code: 304488 Code: 019346
4121 2242
KeepSAFE Nitrile Foam KeepSAFE Grip Latex
Coated Glove Coated Glove
CONFORMS TO EN 388 INTERMEDIATE CONFORMS TO EN 388 INTERMEDIATE
DESIGN EN388 TEST RESULT: 4121 DESIGN EN388 TEST RESULT: 2242
• Nitrile foam palm coating on a • Latex dipped cotton knitted gloves
seamless nylon liner offering with ideal for most sure handling tasks
exceptional dexterity and sensitivity Colour: Green
• Excellent grip in wet, oily or dry Size: 8, 9, 10, 11
conditions Code: 303026
Colour: Grey
Size: 8, 9,10
Code: 303008
8 Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement
Hand Protection
Hand Protection
2242 3121
KeepSAFE Grip Latex Coated Honeywell Work Easy PU
Glove Coated Glove
CONFORMS TO EN 388 INTERMEDIATE CONFORMS TO EN 388 INTERMEDIATE DESIGN
DESIGN EN388 TEST RESULT: 2242 EN388 TEST RESULT: 3121
• Latex dipped cotton knitted gloves • Polyester with a polyurethane coating provide
ideal for most sure handling tasks excellent abrasion, tear resistance and good grip
Size: 8, 9, 10, 11 • Tight knit gives perfect support, limits the
Colour: Yellow penetration of dirt and offers a good touch
Code: 303028 • Ventilated back & PU coating optimise breathability
Size: 8, 9, 10
Colour: Black
Code: 303057
2X1X 511 3243
Honeywell Deerfit Thermal Glove Turtle Skin Workwear Plus
CONFORMS TO EN 388 AND EN 511 INTERMEDI- Puncture Resistant Glove
ATE DESIGN EN388 TEST RESULT: 2X1X CONFORMS TO EN 388 INTERMEDIATE DESIGN
• Water-repellent suede grain leather glove sewn EN388 TEST RESULT: 3243
on thumb • Ultra-comfortable leather work gloves
• Thinsulate liner offers protection against cold specifically designed for tasks that require
temperatures great grip, flexibility, and tactile sensitivity
• Ideal for fork-lift operators and handling cold • Patented blended aramid liner for added
wet materials puncture protection in the palm area.
• 2001610
Size: S, M, L, XL, XXL
Size: 7, 8, 9, 10, 11 Colour: Black
Colour: Yellow Code: 303543
Code: 303062
9 Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement
Hand Protection
Hand Protection
4143 414X4X
Welders Gauntlet KeepCLEAN Canadian Rigger
• Fully socked lined, self hemmed cuff, Style Furniture Hide Glove
black welted
• Furniture cow hide glove supplied in
Colour: Red colours as available
Size: Mens • Safety cuff with vein protection patch
Code: 304002 • Normally supplied with palm patch
• Elasticated back
Size: Men’s
Code: 304016
4143
KeepCLEAN Canadian Rigger KeepSAFE Canadian Rigger Style
Style Pig Split Leather Glove Power Chrome Leather Glove
• Pig leather CONFORMS TO EN 388 INTERMEDIATE
• Safety cuff with vein protection patch DESIGN EN388 TEST RESULT: 4143
• Elasticated back • High quality Grey chrome leather
• Palm lined • Rubberised cuff with vein protection patch
Size: Men’s • Elasticated back
Colour: Yellow • Palm lined
Code: 304017 Colour: Grey
Size: 10
Code: 304056
4143 3133
KeepSAFE Chrome Leather Red KeepSAFE ‘Gold’ Canadian
Cotton Back Rigger Glove Rigger Style Chrome Leather
CONFORMS TO EN 388 INTERMEDIATE Glove
DESIGN EN388 TEST RESULT: 4143 CONFORMS TO EN 388 INTERMEDIATE
• Premier quality chrome split leather DESIGN EN388 TEST RESULT: 3133
• Cotton back • High quality, shoulder chrome leather
• Knuckle and fingertip protection • Elasticated back and lined palm
• Rubberised safety cuff
Size: 10
• Palm lined
Code: 304072
Colour: Red
Size: 10
Code: 304057
KeepSAFE Fit and KeepCLEAN Cotton
Grip Glove Stockinette Glove
CONFORMS TO EN 388 INTERMEDIATE • Standard quality knit wrist
DESIGN EN388 TEST RESULT: 114X Size: Men’s
• High grip PVC lattice finish on a Code: 304111
knitted base providing high levels of
dexterity and grip
Colour: Orange
Size: 10
Code: 304076
10 Ways to Order: Call the PPE Helpdesk (Details on Connect) Network Rail i.procurement