Machinery, Materials Science and Engineering Applications 2014

560 Pages·2014·34.025 MB·English

by  Quanjie Gao, Simon Barrans, Qiang Xu

Machinery,
Materials Science and
Engineering
Applications 2014
Edited by
Quanjie Gao
Simon Barrans
Qiang Xu
Machinery,
Materials Science and
Engineering Applications 2014
Selected, peer reviewed papers from the
4th International Conference on Machinery,
Materials Science and Engineering Applications
(MMSE 2014),
June 28-29, 2014, Wuhan, Hubei, China
Edited by
Quanjie Gao, Simon Barrans and Qiang Xu
Copyright  2014 Trans Tech Publications Ltd, Switzerland

All rights reserved. No part of the contents of this publication may be reproduced or
transmitted in any form or by any means without the written permission of the
publisher.

Trans Tech Publications Ltd
Kreuzstrasse 10
CH-8635 Durnten-Zurich
Switzerland
http://www.ttp.net

Volume 940 of
Advanced Materials Research
ISSN print 1022-6680
ISSN cd 1022-6680
ISSN web 1662-8985

Full text available online at http://www.scientific.net

Distributed worldwide by and in the Americas by
Trans Tech Publications Ltd Trans Tech Publications Inc.
Kreuzstrasse 10 PO Box 699, May Street
CH-8635 Durnten-Zurich Enfield, NH 03748
Switzerland USA
Phone: [phone]
Fax: [phone] Fax: [phone]
e-mail: [email protected] e-mail: [email protected]
Preface

Nowadays, More and more experts and scholars are paying their attention on
Mechanical, Material Science and Aerospace Science and Technology, It is very
important to combine these together from the angle of theory and practice in the field
of industrial engineering. The 2014 4th International Conference on Machinery,
Materials Science and Engineering Applications (MMSE 2014) will provide a good
platform once again for scientists and engineering managers to exchange their
thoughts and cooperation. we will have two important forms to hold this international
conference: Specialist reporting and Group reporting, to discuss and share the newest
important academic thought and academic achievements in Mechanical ,
Manufacturing Engineering, Material Engineering and others.
The 2014 4th International Conference on Machinery, Materials Science and
Engineering Applications (MMSE 2014) is hold by Wuhan University of Science and
Technology, Co-Sponsored by University of Tesside, University of Huddersfield,
University of Nottingham ,Hubei Mechanical Engineering Society.
We will have about 150 representatives from domestic and overseas to attend this
international conference, Here ,I’d like to express my sincere gratitude to those
leaders, Colleges and Universities, Research Institutes,Companies and all
representatives, appreciate your great support on MMSE 2014.

Thank you!
Best wishes for successful work during this conference.
Have a nice day!

MMSE 2014
June 28, 2014
Conference Committees

Conference Chair:
Prof .Quanjie Gao, Wuhan University of Science and Technology, China

Program Committee Chair:
Prof .Guangde Zhang , Wuhan University of Science and Technology, China

Program Committee members
Prof. Yimin Rong , Worcester Polytechnic Institute , USA
Prof .Huamin Zhou, Huazhong University of Science and Technology,China
Prof .Huamin Jin,Wuhan University,China
Prof .Zhiming Zhang ,Wayne State University ,USA
Dr. Qiang Xu, Huddersfield University ,UK
Dr. Simon Barrans, Subject Group Leader for Mechancial Engineering Group, School
of Computing and Engineering, University of Huddersfield. UK
Prof Zhongyu Lu, School of Computing and Engineering, University of
Huddersfield ,UK
Prof .Urszula Forys , University of Warsaw ,Poland
Prof. Aihua Xia,The University of Melbourne,Australia
Prof. Chih-Hsing Chu, National Tsing Hua University,TW
Prof .Jixiang Li ,Wuhan Polytechnic University,China
Prof .Anping Liu,China University of Geosiences,China
Prof .Mucai Ye,China University of Geosiences,China
Prof .Shuiming He,China University of Geosiences,China
Prof .Xiaojin Wang,Wuhan University,China
Prof.Hanbao Li,Wuhan University,China
Prof. Shengwu Xiong, Wuhan University of Technology
Prof. Jie Yang, Wuhan University of Technology

Sponsored by
Wuhan University of Science and Technology

Co-Sponsored by
University of Tesside
University of Huddersfield
University of Nottingham
Hubei Mechanical Engineering Society
Table of Contents
Preface and Conference Committees
Chapter 1: Advanced Materials and Materials Processing
The Effect of Relative Thickness on Microstructures of TiB2/TiC Particles Reinforced
Carbon Steel Matrix Surface Composite
C.Q. Guo 3
Influence on Rare Earth Re3+ by the Performance of Composite Brush Plating of Ni-P
Z.B. Jiang, Y.F. Zhang, S.L. Duan and S.L. Cao 7
Optical Properties and Zinc Nitride Thin Films Prepared Using Magnetron Reactive
Sputtering
J.Q. Feng and J.F. Chen 11
Strain-Hardening Polyvinyl Alcohol Fiber Cement Optimization and Component Tailoring
R. Qian and Y.Z. Bi 16
Investigation of Solvent-Dependent Catalytic Behavior of a Hydrophobic Guest Artificial
Glutathione Peroxidase
Y.Z. Yin, S.F. Jiao, X. Gan, Z.F. Shi, X.X. Hu and Y. Wang 20
Research on Ni-P-Carbon-Nanotube Electro-Brush Plating Composite Coating Technology
Y.F. Zhang, J.C. Wang, X.B. Liao and J. Lei 24
Effect of Addition of Sc, Zr, Er on Microstructure of Al-Mg Ingot to Generate Welding
Wire and Micro-Hardness of Surfacing Layer
X.M. Wang, S. Zhu, Z.H. Zhao, Q.W. Wang and M. Zhang 28
Seperation of Microcystin-RR and Research of its Storage Conditions
Y.Q. Cao, A.J. Gong and X.S. Zhang 32
Analysis of the Solubility of TNT and RDX in TNT/RDX/SC-CO
2
W.S. Ji, Y.K. Ding and Y.Q. Xu 37
Effect of Surface Morphology and Microstructure on Powdering Resistance Performance of
GA Coatings with Different Aluminum Contents
X.H. Yuan, C.Y. Qi and Q.F. Zhang 41
Preliminary Review of the Influence of Cavitation Behavior in Creep Damage Constitutive
Equations
X. Yang, Q. Xu, Z.Y. Lu and S. Barrans 46
The Status and Development of Water Treatment Technology for Supercritical Unit
G.H. Lu, Q.L. Peng, Y. Mei, Z.F. Li and S.A. Cao 52
Modifying Sodium Bicarbonate for Foaming Polymers
S.J. Yao, Z.F. Zhou, F. Ye, Z. Tian and S.M. Wang 59
Chapter 2: Applied Mechanics, Mechanical Engineering and Design
Study of Breeze Vibration of Overhead Transmission Lines with Dampers Using FEM
Analysis
J.W. Yang, P. Chen, Y. Zhang, Z.M. Yu and X.L. Liu 65
Study on Inspection Methods for High-Speed Progressive-Die Punched Strips
Z.P. Hai, Z.H. Yang and J.H. Ning 69
The Influence of Friction Coefficient on Tenon/Groove Contact Performance in Nickel-
Based Turbine Blade-Disc
G.C. Zhou, Z.X. Wen, Z.F. Yue and Y.F. Gao 74
Fatigue Life Analysis of Mine Hoist Drum
X. Peng and X.S. Gong 81
Optimization Design for the Stationary Platen Based on Uniform Design
K.L. Li, H.L. Qi, K.J. Zhu and S.H. Zang 86
Calculation and Analysis of Dynamic Characteristic for Four-Cylinder Engine’s Crankshaft
Z.Q. Wang and H.F. Qiu 91
b Machinery, Materials Science and Engineering Applications 2014
Study on Dynamics Simulation of Long Range Rocket Artillery Launch Guider in Firing
Process Based on ADAMS
Q.B. Cui, J.C. Wang, X.M. Huo and H.F. Luo 95
Application of the Magnetostrictive Displacement Sensor in the Self-Propelled Artillery in
the Performance Test
Z. Meng, Y. Wen, L. Tao, J. Wei and W. Shuai 99
Simulation on the Vehicle Frontal Collision Based on the PC-Crash
C.L. Zhao 103
Study on Analysis of Certain Artillery’s Planetary Transmission Design Based on ANSYS
R.B. Zhou, X.B. Liao, J.M. Yang and Y.F. Zhang 108
Application of FTA-FMEA Method in Fault Diagnosis of Tracked Vehicle
Y.F. Zhang, R.B. Zhou, J.M. Yang and Z. Zhang 112
Failure Analysis and Troubleshooting for Certain Tracked Artillery Deviation
J.M. Yang, Y.F. Zhang, R.B. Zhou and C.F. Liu 116
Optimization Design on Variable Cycle Engine Performance Based on Genetic Algorithm
Y. Zhang, Z.M. Yu, X.D. Zheng and X. Du 120
Research on Transmission Approach between Title Bar Information of Engineering
Drawing and PDM
Z.H. Yang and Z.P. Hai 124
The Design of Detect Equipment of the Self-Propelled Artillery Hydraulic System Based on
Data Fusion Technology
X.B. Liao, L.J. Huang, L. Peng and C.H. Gong 128
Dynamic Simulation Analysis of the Crane Hoisting Process Based on Adams
Y.F. Zhao, L. Sha and Y. Zhu 132
Research on the Gear Box Fault Diagnosis of Self-Propelled Artillery Based on Vibration
Signal Analysis
R.B. Zhou, Y.F. Zhang, J.M. Yang and F. Ling 136
Research and Design for the Calibrating Device of Self-Propelled Artillery’s Center Line
J.M. Yang, C.F. Liu, R.B. Zhou and Z.J. Gao 140
Structural Design and Analysis of Abrasive Disk for Biplane of Multiple Workpieces
P.Y. Bian 144
Kinematic Performance Evaluation for Heavy Duty Industrial Robot
S.Q. Li, Y.Y. Zou, Y.J. Li and Y.J. Li 148
Kinematics Analysis and Torch Pose Fitting for Welding Robot
R.X. Qu, Y.Y. Zou, X.W. An and S.J. Zhu 153
Design of Automobile Body Welding Fixture
L. Xu, C. Ma and X. Xie 159
Cylindrical Cam Profile by CMM Based on Pro/E Model
C. Ma, B. Wang, L. Xu, Y. Yu and R.L. Li 163
Research Status and Development Trend of Dimethyl Ether Fuel Supply System
J. Sun, G.D. Zhang, C.X. You, Q. Yao and Z.H. Hou 167
Construction of the Precision Solution Spraying System Based on Single-Axis Servo Control
X.L. Tang and C.M. Geng 173
Experimental Research on the Stiffness of Hyperboloid Shallow Shell
L.H. Zhao, C.X. Lei, Z.W. Xing and B. Wu 179
CFD Analysis for Cooling Water Cavity of a Four-Cylinder Gasoline Engine
X.X. Liu and M. Chen 184
Design and Research for a New Car Moving Device of Remote Control
J.F. Wang, C. Li and D.D. Wang 188
The Hardware Design of Test-Bench for Motor Energy Efficiency Based on Torque-Meter
Method
H.Q. Zhou, Y.J. Zhang, X.F. Liu, Z.H. Zhang, W. Rao and M.S. Zhang 192
Innovative Design of Circular Loom Based on Integration of Axiomatic Design and Design
Structure Matrix
X. Li, B.C. Zhao, X.Q. Li, S.H. Zhou, H.Y. Tang and Z.H. Sun 197
Design and Analysis of a Climbing Mechanical Appliance
C. Li, L.X. Hu and C.C. Wang 201
Advanced Materials Research Vol. 940 c
Analyzing the Technical Evolutionary Paths of Converter Tilting Mechanism and
Forecasting the Further Development Tendency
J.X. Wang, X.Q. Cao and Q.M. Wu 205
Research and Application of Cold-Rolled Sheet of MES System Based on Real-Time
Database
K.B. Zhang, C. Wang and X.J. Ren 209
Design of a Four-Station Translational and Rotary Worktable for Special Occasions
X.Y. Li, Y.B. Xin, L.D. Si, W.F. Li and P.X. Jin 213
Dynamic Analysis of Spiral Bevel Gear Pair under Time-Varying Backlash
H.S. Qiu, J.H. Yuan, Y. Li and X. Li 217
Research of Pipeline Weld Detection Based on Magnetic Memory Technology
F.F. Long, J.Z. Wang, L. Li and J.R. Zhao 222
The Effect of Face and Side Panels of Honeycomb Core on its Equivalent In-Plane Elastic
Properties
W.Y. Cao and G.Y. Shi 226
Parametric Design of Jib in Rapid Design System of Tower Crane
L.W. Wang, X.Q. Mu, X.J. Wang and W.L. Du 232
Research on Crack of Cylinder Bracket Based on Numerical Simulation and Finite Element
Analysis
H.F. Luo, J.C. Wang, J. Lei and Q.B. Cui 236
Analysis and Structure Modified of Gun’s Unreliable Percussion
J.C. Wang, H.F. Luo, Q.B. Cui and J. Lei 241
Design and Optimization of Lifting Mechanism Based on a Kind of Rotary-Type Desk
J.F. Wang, L.X. Hu and C.C. Wang 245
Analysis of Axial Holding Capability about the Lengthened Shrink-Fit Holder and Cutting
Tool System
J.T. Li, S.L. Wang, Z.F. Li, Y.H. Yu and X.L. Cheng 249
Fire Rescue Robot Design Based on Solidworks
R. Zhang, W.P. Wang, Z.Q. Shi, J. Hu, P.F. Xu, X. Wu and H. Li 254
Cleaning Machine Design of Building Glass Curtain Wall
R. Zhang, H. Li, Y. Chen, J. Xiong, C.S. Chen, Y.R. Ke, J. Hu and Y.J. Chao 258
Analysis of a Micro-Displacement Amplification Mechanism Based on Piezoelectric Stack
L. Yang, J.X. Chu, Y.S. Deng, X. Xu and K. Wei 262
Parameter Identification of Surface Roughness in Ultra-Precision Turning Processing
Based on GA-RBF Neural Network
J.L. Chen 267
The Simulation and Improvement of the Heating Furnace Lifting Framework Based on
ANSYS
J.L. Shi, G.Y. Meng, C.Q. Zhu and D. Wang 271
Research on the Punching Method of Multi-Position Progressive Die with the Feature Unit
as the Step
J.H. Ning, H.J. Wang, J.L. Song, Z. Shi and J.Z. Mao 275
Fault Diagnosis for the Electric Starting System of Self-Propelled Artillery Based on
Information Fusion Technology
C.F. Liu, Z.X. Xie, J.M. Yang and Z.J. Gao 280
Test Study on Slipping Performance of the Flexible Nodes of the Precast Concrete Exterior
Wall Cladding Panel
R.N. Liu, K.Y. Zhang and M.L. Tao 284
Design of Internal Structure of Ammunition Storage and Transportation Shelter
W. Wang, Z.L. Xuan, S.S. Wang and Z.Q. Duan 289
Conformal s-Shaped Inlet Design and Flow Field Characteristics of Flying Wing Unmanned
Aerial Vehicle
L. Zhang, Z. Zhou and H.B. Wang 295
Simulation of Characteristics of Debris Cloud Produced by Hypervelocity Impact
W.L. Ma, W. Zhang and B.J. Pang 300
The Safe Auxiliary System for Aircraft’s Forced Landing
X.J. Wang, X. Li, X.L. Peng and Q.F. Fang 306
d Machinery, Materials Science and Engineering Applications 2014
3D Printing Manufacture Micro-Channel Structure by Metal Micro Droplet-on-Demand
Deposition
Y.P. Chao 311
Remote Sensor Lens Design Based on the Matching of Materials
T.J. Tang and D.W. Sun 316
Design and Analysis of Suspension Scheme for Space Manipulator Low-Gravity Test
W. Feng, W.M. Yi, F.W. Meng, X.P. Shen and X.D. Song 321
Chapter 3: Control Systems, Electrical and Power Engineering
The Research on the Current Situation of Micro-Grid
Y.J. Ma, M. Yu and X.S. Zhou 329
The Current Research on STATCOM
Y.J. Ma, D.X. Wang and X.S. Zhou 333
The Overview of Energy Storage Technology
Y.J. Ma, H.K. Lu and X.S. Zhou 336
The Review of of Active Power Filter
X.S. Zhou, W. Liu and Y.J. Ma 339
The Research on the Key Technologies in PV System
Y.J. Ma, S. Wang and X.S. Zhou 343
Optimization Design on Subspan Oscillation of Multi-Conductor
J.W. Yang, Z.M. Yu, S.Q. Luo, P. Chen and S.J. Xiang 347
Analysis on Electromagnetic Properties of Lapped Joints
W.T. Xia, H. Li and S.Q. Zhang 351
Magnetic Circuit Optimization Design and Simulation Analysis of Electromagnetic Inertial
Actuator
H.L. Cao, Z.T. Yan and J.J. Lou 356
Research on Power Communication Network Integrated All-Optical Switching
W. Shen, H. Deng, W. Wang and H. Yu 362
Signal Testing System of Electronic Equipment Based on Bluetooth and LabVIEW
X. Zhou, H.Y. Zhao, X.J. Liao and L. Qiu 366
Research and Implementation of High-Speed Positioning Control Base on Feedforward PID
Control
K. Wei, X. Xu, Y.S. Deng, J.X. Chu and L. Yang 370
Research of Vehicle Trajectory Tracking Based on Human-Simulated Intelligent Control
W.Z. Zhang, G. Chen, L.M. Hu, T. Wang, S.T. Cui and Q. Jiang 375
Motor Torque Stability and Controlling Research in Variable Load Condition
Y.Z. Cheng, Y.L. Ma and X. Chen 380
The Thermal Analysis and Simulation of On-Chip Temperature Control Technology in the
Micro-Gyroscope
B. Yang, L. Xu, W.S. Fu and Y.P. Deng 386
Studies on the Active Control and Placement of Piezoelectric in Piezoelectric Cantilever
Beam
J. Guo, X.X. Lian and Q. Zhao 391
Research on a New Type of Self-Propelled Artillery Control System Test Equipment
X.B. Liao, R.B. Zhou, Z.Z. Quan and L. Peng 396
Design of Controlled Fire Bottle Filling Equipment of New Self-Propelled Artillery
X.B. Liao, S.X. Xie, H.Y. Zhao and R. Zhang 401
Experimental Study on Detection Method of Micro-Fluidic Chip
Z. Xi and W. Bo 405
Solar Array Mounting Effects on Flutter Characteristics of Solar-Powered UAV
W. Wang, Z. Zhou and X.P. Zhu 410
Waste Electronics Recycling System Based on Electronic Information Platform
C.C. Wang, D.D. Wang and J.L. Song 415
Attitude Control of Flying Wing UAV Based on Active Disturbance Rejection Control and
Multi-Object Nonlinear Control Allocation
J. Tan, Z. Zhou, X.P. Zhu and W. Wang 419