CURRICULUM VITAE Josué Amilcar Aguilar Martínez I. Datos Generales II. Formación Académica ...

26 Pages·2017·0.23 MB·Spanish

by  Josué Aguilar

CURRICULUM VITAE
Josué Amilcar Aguilar Martínez

I. Datos Generales
Nombre: Josué Amilcar Aguilar Martínez
Lugar y Fecha de Nacimiento: Comalcalco Tabasco, México. 18 de Septiembre de 1974
Estado Civil: Casado
RFC: AUMJ740918Q0
Correo Electrónico: [email protected]
[email protected]
II. Formación Académica
1. Doctorado Doctorado en Ingeniería de Materiales (17-Dic-2013)
Facultad de Ingeniería Mecánica y Eléctrica
Universidad Autónoma de Nuevo León
2. Maestría Maestría en Ciencias en Ingeniería Cerámica (2003)
CINVESTAV-Unidad Saltillo
3. Licenciatura Licenciado en Física (1999)
Facultad de Ciencias Físico-Matemáticas
Universidad Autónoma de Nuevo León
4. Bachillerato Técnico en Alimentos (1993)
C.E.T.I.S. 133
III. Nombramientos
1. SNI: Nivel I, No. De expediente: 47590, 01/01/2017-31/12/2019.
2. Reconocimiento a Perfil Deseable Oficio No. DSA/103.5/16/8078.
Jun/17/2016-Jun/16/2019.
IV. Líneas de Investigación
1. Procesamiento, caracterización y estudio de los fenómenos interfaciales de
compósitos metal/cerámico y cerámico/cerámico.
2. Procesamiento y caracterización de cerámicos avanzados con aplicaciones
funcionales y estructurales.
3. Caracterización de materiales cristalinos por difracción de rayos X.
V. Revisor de las siguientes revistas:
1. Journals of Physics D: Applied Physics (IOP),
2. Materials Research Express (IOP),
3. Materials Letters (ELSEVIER),
4. Ceramics International (ELSEVIER)
5. Materials Chemistry and Physics (ELSEVIER),
6. Powder Technology (ELSEVIER),
7. Journal of Physics and Chemistry of Solids (ELSEVIER)
8. Journal of the American Ceramic Society (Wiley)
VI. Artículos publicados en revistas indizadas en la Journal Citation
Reports (JCR) (a la fecha 42).
2017
1. A.N. Bondarchuk, L.M. Peter, G.P. Kissling, E. Madrid, J.A. Aguilar-
Martínez, Z. Rymansaib, P. Iravani, M. Gromboni, L.H. Mascaro, A. Walsh, F.
Marken, Vacuum-annealing induces sub-surface redox-states in surfactant-
structured α-Fe O photoanodes prepared by ink-jet printing, Applied Catalysis
2 3
B: Environmental 211 (2017) 289-295. ISSN: 0926-3373, Impact Factor:
9.446
2. M.B. Hernández, S. García-Villarreal, R.F. Cienfuegos-Pelaes, C. Gómez-
Rodríguez and J.A. Aguilar-Martínez. Structural, microstructure and electric
properties of SnO -Sb O -Cr O varistor ceramics doped with Co SnO spinel
2 2 5 2 3 2 4
phase previously synthesized. Journal Alloys and Compounds 699 (2017) 738-
744. ISSN: 0925-8388, Impact Factor: 3.133
3. V. Vinayakumar, S. Shaji, D. Avellaneda, T.K. Das Roy, G.A. Castillo, J.A.
Aguilar Martinez, B. Krishnan. CuSbS thin films by Rapid Thermal
2
Processing of Sb S -Cu Stack Layers for Photovoltaic Application. Solar
2 3
Energy Materials and Solar Cells 164 (2017) 19-27. ISSN: 0927-0248, Impact
Factor: 4.784
4. J. Johny, S.S. Guzman, B. Krishnan, D.A. Avellaneda, J.A. Aguilar Martinez,
S. Shaji. Synthesis and properties of SnS thin films from nanocolloids prepared
by pulsed laser ablation in liquid, ChemPhysChem, 18 (2017) 1061-1068.
ISSN: 1439-7641, Impact Factor: 3.075
5. S. Shaji, L.V. Garcia, S.L. Loredo, B. Krishnan, J.A. Aguilar Martinez, T.K.
Das Roy, D.A. Avellaneda. Antimony sulfide thin films prepared by laser
assisted chemical bath deposition, Applied Surface Science, 393 (2017) 369-
376. ISSN: 0169-4332, Impact Factor: 3.387
2016
6. J.A. Aguilar-Martínez, P. Zambrano-Robledo, S. García-Villarreal, M.B.
Hernández, Edén Rodríguez, and L. Falcon-Franco. Effect of high content of
Co O on the structure, morphology and electrical properties of (Cr,Sb)-doped
3 4
SnO varistors. Ceramics International, 42 (2016) 7576-7582. ISSN: 0272-
2
8842, Impact Factor: 2.986.
7. E. Rodríguez, F.H. Moreno, J.A. Aguilar-Martínez, A.E. Montes-Mejía, J.J.
Ruiz-Valdés, R. Puente-Ornelas, J.E. Contreras. Effect of nano-titania (η-TiO )
2
content on the mechano-physical properties of a magnesia refractory composite,
Ceramics International, 42 (2016) 8445–8452. ISSN: 0272-8842, Impact
Factor: 2.986.
8. M.I. Mendivil, L.V. Garcia, D. Avellaneda, J.A. Aguilar Martinez,
B. Krishnan and S. Shaji. Structure and properties of CdS thin films prepared
by pulsed laser assisted chemical bath deposition. Materials Research Bulletin
83 (2016) 459-467. ISSN: 0025-5408, Impact Factor: 2.446
2015
9. J.A. Aguilar-Martínez, Edén Rodríguez, S. García-Villarreal, L. Falcón-
Franco, M.B. Hernández. Effect of Ca, Sr and Ba on the structure, morphology
and electrical properties of (Co,Sb)-doped SnO varistors. Materials Chemistry
2
and Physics 153 (2015) 180-186. ISSN: 0254-0584, Impact Factor: 2.084
10. C. Leyva-Porras, A. Toxqui-Terán, M. Miki-Yoshida, M. Rojas-Villalobos, M.
García-Guaderrama and J.A. Aguilar-Martínez. Low temperature synthesis of
anatase TiO nanoparticles by an acid assisted sol-gel method. Journal Alloys
2
and Compounds 647 (2015) 627-636. ISSN: 0925-8388, Impact Factor: 3.133
11. C. Gómez Rodríguez, T.K. Das Roy, S. Shaji, G.A Castillo Rodríguez, L.
García Quiñonez, Edén Rodríguez, J.O. González and J.A. Aguilar-Martínez.
Effect of addition of Al O and Fe O nanoparticles on the microstructural and
2 3 2 3
physicochemical evolution of dense magnesia composite. Ceramics
International 41 (2015) 7751-7758. ISSN: 0272-8842, Impact Factor: 2.986
12. M.I. Mendivil, L.V. Garcia, D. Avellaneda, J.A. Aguilar Martinez,
B. Krishnan and S. Shaji. CuInGaSe nanoparticles by pulsed laser ablation in
2
liquid medium. Materials Research Bulletin 72 (2015) 106-115. ISSN: 0025-
5408, Impact Factor: 2.446
13. A. Bondarchuk, A. Glot, C. Leyva-Porras and J.A. Aguilar Martínez. Current
limiting effect in barium-doped indium oxide ceramics. Journal of Electronic
Materials 44 (2015) 3646-3653. ISSN: 0361-5235, Impact Factor: 1.579
14. E.A. Rodríguez, A.K. Limones, J.J. Ruiz-Valdés, Rodrigo Puente-Ornelas, J.E.
Contreras and Ana María Arato, and J.A. Aguilar-Martínez. Effect of
hercynite spinel content on the properties of magnesia-calcium zirconate dense
refractory composite. Journal of the European Ceramic Society 35 (2015) 2631-
2639. ISSN: 0955-2219, Impact Factor: 3.411
15. L.V. García, M.I. Mendivil, G. García Guillen, J.A. Aguilar-Martinez, B.
Krishnan, D. Avellaneda, G.A. Castillo, T.K. Das Roy, S. Shaji. CdS thin films
prepared by laser assisted chemical bath deposition. Applied Surface Science
336 (2015) 329-334. ISSN: 0169-4332, Impact Factor: 3.387
16. J.C. Díaz-Guillén, G. Vargas-Gutiérrez, E.E. Granda-Gutiérrez, J.A. Aguilar-
Martínez, M.A. González-Albarrán, L. Álvarez-Contreras. Influences of
processing time and discharge current density during pulsed plasma oxidizing
process of AISI 316L. Journal of Materials Engineering and Performance 24
(2015) 2368-2372. ISSN: 1059-9495, Impact Factor: 1.331
2014
17. M.Z. Saavedra-Leos, C. Leyva-Porras, E. Martínez-Guerra, S.A. Pérez-García,
J.A. Aguilar-Martínez, C. Álvarez-Salas. Comparison of the physical
properties of Inulin and Inulin-Orange juice: Physical characterization and
technological application. Carbohydrate Polymers. 105 (2014) 10-19. ISSN:
0144-8617, Impact Factor: 4.811
18. A.N. Bondarchuk, J.A. Aguilar-Martinez, M.I. Pech-Canul. Effects of Zr
dopant and sintering temperature on electrical properties of In O -SrO based
2 3
ceramics. Ceramics International 40 (2014) 11533-11541. ISSN: 0272-8842,
Impact Factor: 2.986
19. R. Muñoz-Arroyo, H.M. Hdz-García, J.C. Escobedo-Bocardo, E.E. Granda-
Gutiérrez, J.L. Acevedo-Dávila, J.A. Aguilar-Martínez and A. Garza-Gomez.
Magnesium removal from an aluminum A-332 molten alloy using enriched
zeolite with nanoparticles of SiO . Adv. Mater. Sci. Eng. 2014 (2014) 7. ISSN:
2
1687-8434, Impact Factor: 1.299
20. Ana M. Arizmendi-Morquecho, Araceli Campa-Castilla, César Leyva-Porras,
J.A. Aguilar-Martínez, Gregorio Vargas-Gutiérrez, K.J. Moreno and L.
López- López. Microstructural characterization and wear properties of Fe-based
amorphous-crystalline coating deposited by twin wire arc spraying. Adv. Mater.
Sci. Eng. 2014 (2014) 11. ISSN: 1687-8434, Impact Factor: 1.299
2013
21. J.A. Aguilar-Martínez, M.A. Esneider Alcalá, M.B. Hernández, M.I. Pech-
Canul and S. Shaji. Optimal parameters for synthesizing single phase spinel-
type Co SnO by sol-gel technique: structure determination and microstructure
2 4
evolution. Journal Alloys and Compounds 574 (2013) 278-282. ISSN: 0925-
8388, Impact Factor: 3.133
22. J.A. Aguilar-Martínez, M.I. Pech-Canul, C. Leyva-Porra, Edén Rodríguez and
V. Iván Hernández. Effect of Co O content and compaction pressing on the
3 4
microstructure and electric properties of SnO -Sb O -Cr O varistor ceramics.
2 2 5 2 3
Ceramics International 39 (2013) 8237-8243 ISSN: 0272-8842, Impact Factor:
2.986
23. J.A. Aguilar-Martínez, M.I. Pech Canul, M.B. Hernández, A.B. Glot, Edén
Rodríguez and L. García Ortiz. Effect of sintering temperature on the electric
properties and microstructure of SnO -Co O -Sb O -Cr O varistor ceramic.
2 3 4 2 5 2 3
Ceramics International, 39 (2013) 4407-4412. ISSN: 0272-8842, Impact
Factor: 2.986
24. J.A. Aguilar-Martínez, M I Pech-Canul, M B Hernández, A.B. Glot, Edén
Rodríguez and L. García Ortiz. Effect of Cr O on the microstructure and non-
2 3
ohmic properties of (Co, Sb)-doped SnO varistors. Revista Mexicana de Física
2
59 (2013) 6-9. ISSN: 0035-001X, Impact Factor: 0.482
25. C. Leyva-Porra, M.A. Esneider-Alcalá, A. Toxqui-Terán, A. Márquez-Lucero
and J.A. Aguilar-Martínez. Effect of molding parameters on Young’s
modulus of an injection molded low-density polyethylene (LDPE). Industrial &
Engineering Chemistry Research, 52 (2013) 5666-5671. ISSN: 0888-5885,
Impact Factor: 2.843
26. Edén A. Rodríguez, G-Alan Castillo, Tushar K. Das, R. Puente-Ornelas, Yadira
González, Ana-María Arato and J.A. Aguilar-Martinez. MgAl O spinel as an
2 4
effective ceramic bonding in a MgO-CaZrO refractory. Journal of the
3
European Ceramics Society 33 (2013) 2767–2774. ISSN: 0955-2219, Impact
Factor: 3.411
27. A. Yu. Lyashkov, A.S Tonkoshkur, J.A. Aguilar-Martinez and A.B. Glot.
ZnO-Ag ceramics for ethanol sensors. Ceramics International, 39 (2013) 2323-
2330. ISSN: 0272-8842, Impact Factor: 2.986
28. S García-Villarreal, A. Arizmendi, A. Chávez-Valdez, J.A. Aguilar-Martínez,
M. Esneider-Alcalá and L. Falcón-Franco. Effect of cooling rate on the
microstructure of Al-Zn alloys with addition of silicon as nanocomposite. Adv.
Mater. Sci. Eng. 2013 (2013) 1-9. ISSN: 1687-8434, Impact Factor: 1.299
29. S. García-Villarreal, A. Chávez-Valdez, K.J. Moreno, C. Leyva, J.A. Aguilar-
Martínez, A. Hurtado, A. Arizmendi-Morquecho. Microstructural and
mechanical characterization of Al-Zn-Si nanocomposites. Materials
Characterization 83 (2013) 187-197. ISSN: 1044-5803, Impact Factor: 2.714
30. M.I. Mendivil, F.A. Sánchez, S. Martínez, D.I. García-Gutiérrez, J.A. Aguilar-
Martínez, Alan Castillo and Sadasivan Shaji. Synthesis of Silver Nanoparticles
and Antimony Oxide Nanocrystals by Pulsed Laser Ablation in Liquid Media.
Applied Physics A: Materials Proccesing. 110 (2013) 809-816. ISSN: 0947-
8396, Impact Factor: 1.455
2012
31. J.A. Aguilar-Martínez, M.I. Pech-Canul, M. Esneider A. Toxqui and S. Shaji.
Synthesis and characterization of spinel-type Co SnO by sol-gel method.
2 4
Materials Letters 78 (2012) 28-31. ISSN: 0167-577X, Impact Factor: 2.572
32. J.C. Díaz Guillén, G. Vargas Gutiérrez, E.E. Granda Gutiérrez, J.A. Aguilar
Martínez, J. Candelas Ramírez, S.I. Pérez Aguilar, L. Álvarez Contreras.
Electrochemical Corrosion Performance of Hematite-Free Magnetite Layer on
AISI 4340 by Duplex Pulsed Plasma Nitriding-Oxidizing Treatment. Int. J.
Electrochem. Sci. 7 (2012) 7261-7269. ISSN: 1452-3981, Impact Factor: 1.469
33. Edén Rodríguez, G-Alan Castillo, José Contreras, R. Puente-Ornelas, J.A.
Aguilar-Martínez, Laura García, Cristian Gómez. Hercynite and magnesium
aluminate spinels acting as a ceramic bonding in an electrofused MgO-CaZrO
3
refractory brick for the cement industry. Ceramics International, 38 (2012)
6769-6775. ISSN: 0272-8842, Impact Factor: 2.986
2009
34. J.A. Aguilar-Martínez, A.B. Glot, A.V. Gaponov, M.B. Hernández, and J.
Guerrero-Paz. Current-voltage characteristics of SnO -Co O -Cr O -Sb O
2 3 4 2 3 2 5
ceramics. Journal Physics D: Applied Physics. 42 (2009). Pp (7)
doi:10.1088/0022-3727/42/20/205401. ISSN: 0022-3727, Impact Factor: 2.588
35. J.A. Aguilar-Martínez, M.B. Hernández, M.I. Pech-Canul, A.B. Glot and J.
Castillo-Torres. A comparative study between the mixed-oxide and high-energy
milling planetary method on electrical and microstructural properties for a
SnO -based ceramic system. Journal of Materials Processing Technology, 209
2
(2009) 318-323. ISSN: 0924-0136, Impact Factor: 3.147
2008
36. J.A. Aguilar-Martínez and M.B. Hernández. “La infiltración no asistida como
una técnica de procesamiento de compósitos Al-Mg-Si/SiC”. Revista Mexicana
de Física, 54 (5) (2008) 336-340. ISSN: 0035-001X, Impact Factor: 0.482
37. J.A. Aguilar-Martínez, A. Durán-Regules, A.B. Glot, M.B. Hernández, M.I.
Pech-Canul and J. Castillo-Torres. Effect of CaO on the microstructure and
non-ohmic properties of (Co, Sb)-doped SnO varistors. Revista Mexicana de
2
Física 54 (1) (2008) 20-24. ISSN: 0035-001X, Impact Factor: 0.482
2007
38. J.A. Aguilar-Martínez, M.B. Hernández, A.B. Glot and M.I. Pech-Canul.
Microstructure and electrical properties in SnO ceramics with sequential
2
addition of Co, Sb, and Ca. Journal Physics D: Applied Physics, 40 (2007)
7097-7102. ISSN: 0022-3727, Impact Factor: 2.588
39. J.A. Aguilar-Martínez, M.B. Hernández, J. Castillo-Torres and M.I. Pech-
Canul. Effect of particle and Mg content on the processing parameters of Al-Si-
Mg/SiCp composites processed by pressureless infiltration. Revista Mexicana de
Física, 53 (3) (2007) 205-209. ISSN: 0035-001X, Impact Factor: 0.482
2006
40. J. Castillo-Torres, J. Hernández A., S. González-Martínez, A. Aguirre-López.,
M.B. Hernández, and J.A. Aguilar-Martínez. Self-focusing in chromium-
doped potassium niobate single ceramic crystal. Revista Mexicana de Física 52
(2006). 540. ISSN: 0035-001X, Impact Factor: 0.482
2004
41. J.A. Aguilar-Martínez, M.I. Pech-Canul, M. Rodríguez-Reyes and J.L. de la
Peña. Effect of Mg and SiC Type on the Processing of Two-Layer Al/SiC
p
Composites by Pressureless Infiltration. Journal of Materials Science 39
(2004)1025-1028. ISSN: 0022-2461, Impact Factor: 2.599
2003
42. J.A. Aguilar-Martínez, M.I. Pech-Canul, M. Rodríguez-Reyes and J.L. de la
Peña. Effect of Processing Parameters on the Degree of Infiltration of SiC
Preforms by Al-Si-Mg Alloys. Materials Letters 57 (2003) 4332-4335. ISSN:
0167-577X, Impact Factor: 2.572
VII. Artículos publicados en revistas arbitradas (a la fecha 9).
2016
1. D.L. Rodriguez Vela, B. Krishnan, J.A. Aguilar Martínez, S.L. Loredo, S.
Shaji, AgSb(SxSe1-x) thin films by rapid thermal processing of Sb S -Ag-Se
2 2 3
thin films for photovoltaic applications, physica status solidi (c), 13 (2016) 47-
52. ISSN: 1610-1642
2. A. Chaira-Sánchez, A. Vera-Marquina, A.L. Leal-Cruz, J.A. Aguilar-Martínez,
L.A. García-Delgado, A. García-Juárez, Microstructural and Optical
Characterization of Single and Multilayers of ZnO for TFTs Active Layer,
Nanoscience and Nanotechnology 6(1A) (2016) 68-70. e-ISSN: 2163-2588
2015
3. J.C. Díaz-Guillén, E.E. Granda-Gutiérrez, G. Vargas-Gutiérrez, M.R. Díaz-
Guillén, J.A. Aguilar-Martínez, L. Álvarez-Contreras, Effect of Nitriding
Current Density on the Surface Properties and Crystallite Size of Pulsed
Plasma-Nitrided AISI 316L, Journal of Materials Science and Chemical
Engineering 3 (2015) 45-51. ISSN: 2327-6045
2013
4. J. Guerrero-Paz, H. Dorantes-Rosales, J.A. Aguilar-Martínez, V. Garibay-
Febles, Nanograin formation in milled MoO powders, IOP Conference Series:
3
Materials Science and Engineering 45 (1) (2013) 012006. ISSN: 1757-8981
5. J.S. Zamarripa-Pina, H.M. Hdz-Garcia, J.C. Díaz-Guillen, J.A. Aguilar-
Martínez, E.E. Granda-Gutiérrez, M.A. González. Increase in Hardness and
Chloride Corrosion Resistance of 6061 Aluminum Alloy by Pulsed Plasma
Nitriding. International Journal of Emerging Technology and Advanced
Engineering 3 (2013) 348-353. ISSN: 2250-2459
2012
6. M. Rodríguez-Reyes, J.R. Parga-Torres, J.A. Díaz-Guillen, J.A. Aguilar-
Martínez and M. M. Cisneros. Infiltration of nano-SiC-Al O and nano-SiC-
2 3
SiO preforms using an Al-Si-Mg alloy. Journal of Materials Science and
2
Engineering with Advanced Technology, 6 (2012) 47-69. ISSN: 0976- 1446
7. H.M. Hdz-García, J.L. Acevedo-Dávila, L.A. García-Cerda, M.I. Pech-Canul,
R. Muñoz-Arroyo, F.A. Reyes-Valdes, F.A. Hernández-García, J.A. Aguilar-
Martínez. Effects of Si and Ni nanoparticles in Brazing process on fracture
surfaces of 304 stainless steels. MRS Online Proceedings Library 2012 1381:
imrc11-1381, S22-012. ISSN: 1946-4274
8. Ana Arizmendi-Morquecho, Alejandra Chávez-Valdez, Josué Aguilar, and
Jaime Álvarez. Fly ash/rare earth oxide coatings by EPD: Processing and
characterization. Key Engineering Materials, 507 (2012) 197-202. ISSN: 1013-
9826
2011
9. Edén Rodríguez, G. Alan Castillo, José Contreras, J.A. Aguilar Martínez,
Yadira González, Ana María Guzmán, L. García Ortiz. Desarrollo de un
refractario MgO-CaZrO dopado con MgAl O para la industria cementera.
3 2 3
CIENCIA 14 (2011) 31-38, ISSN: 2007-1175
VIII. Patentes
2014
1. Varistor cerámico basado en SnO y su proceso de obtención. Josué Amilcar
2
Aguilar Martínez y Sadasivan Shaji. Expediente: MX/a/2014/015688,
Fecha de Registro:17/12/2014, condición actual: Registro.
2013
2. Método de preparación de óxido de titanio nanometrico en fase anatasa, a baja
temperatura. Cesar Cutberto Leyva Porras, Alberto Toxqui Terán, Josué
Amilcar Aguilar Martínez y Marco Leopoldo García Guaderrama.
Expediente: MX/a/2013/012102, Fecha de Registro:17/10/2013, condición
actual: Registro.
IX. Artículos publicados en extenso en memorias de congresos
nacionales e internacionales con arbitraje (a la fecha 19).
2013
1. F. Carmona-Muñoz, R. Muñoz-Arroyo, H.M. Hdz-García, J.C. Escobedo-
Bocardo, F.A. Reyes-Valdés, J.A. Aguilar-Martínez, L. Santiago-Bautista.
Remoción de magnesio de una aleación Al-Si A332 usando zeolita mineral
enriquecida con nano partículas base sílice. XXXV International Congress on
Metallurgy and Materials, 23-25/Oct/2013, Saltillo Coah., México, pp. 298-
307. ISBN: Pendiente.
2012
2. A.K. Limones, E.A. Rodríguez, Cristian Gómez, J.A. Aguilar-Martínez, L.
García-Ortiz, R. Puente-Ornelas Y. González. Efecto de la adicción de la
espinela hercinita (FeAl O ) sobre una matriz refractaria MgO-CaZrO para
2 4 3
aplicaciones en hornos rotatorios de la industria cementera. XXXIV
International Congress on Metallurgy and Materials, 24-26/Oct/2012, Saltillo
Coah., México, pp. 214-223. ISBN:978-607-7912-24-8
2011
3. G-Alan Castillo, José Contreras, Fabiola Dávila, Laura García, Cristian Gómez,
Yadira González, Ana-María Guzmán, Edén Rodríguez and J.A. Aguilar-
Martínez. Improvement of an electrofused MgO-CaZrO refractory matrix by
3
the addition of hercynite spinel and magnesium-aluminum spinel for the cement
industry. 54th International Colloquium on Refractories 2011, Oct. 19-20,
2011. EUROGRESS, Aachen, Germany. pp. 120-123. ISBN: 978-3-00-
034419-0.
4. M. I. Mendivil, F. A. Sánchez, S. Martínez, D. I. García-Gutiérrez, J.A.
Aguilar-Martínez, Alan Castillo and Sadasivan Shaji. Synthesis of Silver
Nanoparticles and Antimony Oxide Nanocrystals by Pulsed Laser Ablation in
Liquid Media. 11Th International Conference on Laser Ablation (COLA 2011),
Nov. 13-19, 2011, Playa del Carmen, México.
2010
5. M. Rodríguez-Reyes, D. Vázquez-Obregón, J.E. Pérez-Terrazas, M.I. Pech-
Canul, J.A. Aguilar-Martínez, H.F. López. Degradation of Al C in Al-Mg-
4 3
Si/SiC composites exposed to moist environments. XIX International
Conference on Extractive Metallurgy: Recent developments in metallurgy,
materials and environment, 19-21/Mayo/2010, Saltillo Coah., México, pp. 244-
251. ISBN:978-607-9023-03-4
6. A.B. Glot, A.N. Bondarchuk, A.I. Ivon, L. Fuentes, J.A. Aguilar-Martinez,
M.I. Pech-Canul, N. Pineda-Aguilar. Influence of Joule heating on varistor
behavior in SnO –Co O –Nb O –Cr O ceramics. XIX International
2 3 4 2 5 2 3
Conference on Extractive Metallurgy: Recent developments in metallurgy,
materials and environment, 19-21/Mayo/2010, Saltillo Coah., México, pp. 572-
581. ISBN:978-607-9023-03-4
7. J.A. Aguilar-Martínez, A. Toxqui-Terán, and M.A. Esneider. Preliminary
study of processing parameters: Co O content and compaction pressing on the
3 4
electric properties of SnO -Sb O -Cr O varistor ceramics. Recent
2 2 5 2 3
developments in metallurgy, materials and environment, 19-21/Mayo/2010,
Saltillo Coah., México, pp. 729-735.
2009
8. M. Rodríguez-Reyes, M. I. Pech-Canul, J.A. Aguilar-Martínez, and H.F.
Lópéz. Efecto de las partículas de SiO sobre la microestructura de compósitos
2
Al/SiC/MgAl O procesados por infiltración reactiva. XXXI International
2 3
Congress on Metallurgy and Materials, 22-23/Oct/2009, Saltillo Coah., México,
pp. 130-139. ISBN:978-607-9023-03-4
2007
9. J.A. Aguilar-Martínez, A. Durán-Régules, M.I. Pech-Canul, A.B. Glot, and
M.B. Hernández. Study comparative between Sb O and Nb O doping and
2 5 2 5
sintering temperature on varistor properties of SnO -Co O -based ceramics.
2 3 4
XXIX International Congress on Metallurgy and Materials, 17-19/Oct/2007,
Saltillo Coah., México, pp. 51-58.