Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance. Towards Zero Carbon Transportation

782 Pages·2014·25.77 MB·English

by  R. Folkson (Eds.)

Alternative fuels and Advanced vehicle technologies for
improved environmental performance
Related titles:
Self-piercing riveting
(ISBN 978-1-84569-535-4)
Tailor welded blanks for advanced manufacturing
(ISBN 978-1-84569-704-4)
Corrosion prevention of magnesium alloys
(ISBN 978-0-85709-437-7)
Woodhead publishing Series in energy: Number 57
Alternative fuels and
Advanced vehicle
technologies for
improved
environmental
performance
towards zero carbon transportation
Edited by
Richard Folkson
amsterdam • boston • cambridge • heidelberg • london
new york • oxford • paris • san diego
san francisco • singapore • sydney • tokyo
Woodhead Publishing is an imprint of Elsevier
Woodhead Publishing is an imprint of Elsevier
80 High Street, Sawston, Cambridge, CB22 3HJ, UK
225 Wyman Street, Waltham, MA 02451, USA
Langford Lane, Kidlington, OX5 1GB, UK
Copyright © 2014 Woodhead Publishing Limited. All rights reserved
Exceptions to the above:
Chapters 2 and 3: © 2014 R. J. Pearson and J. W. G. Turner. Chapter 4 was prepared by
US Government employees; it is therefore in the public domain and cannot be copyrighted.
Published by Woodhead Publishing Limited.
No part of this publication may be reproduced, stored in a retrieval system or transmitted
in any form or by any means electronic, mechanical, photocopying, recording or otherwise
without the prior written permission of the publisher.
Permissions may be sought directly from Elsevier’s Science & Technology Rights
Department in Oxford, UK: phone (+44) (0) 1865 843830; fax (+44) (0) 1865 853333;
email: [email protected]. Alternatively you can submit your request online by
visiting the Elsevier website at http://elsevier.com/locate/permissions, and selecting
Obtaining permission to use Elsevier material.
Notice
No responsibility is assumed by the publisher for any injury and/or damage to persons or
property as a matter of products liability, negligence or otherwise, or from any use or
operation of any methods, products, instructions or ideas contained in the material herein.
Because of rapid advances in the medical sciences, in particular, independent verification
of diagnoses and drug dosages should be made.
British Library Cataloguing-in-Publication Data
A catalogue record for this book is available from the British Library
Library of Congress Control Number: 2014931601
ISBN 978-0-85709-522-0 (print)
ISBN 978-0-85709-742-2 (online)
For information on all Woodhead Publishing publications
visit our website at http://store.elsevier.com/
Typeset by Replika Press Pvt Ltd, India
Printed and bound in the United Kingdom
contributor contact details
(* = main contact)
Editor and Chapter 1 Chapter 5
R. Folkson J. W. Sheffield and K. B. Martin
Royal Academy of Engineering Formerly of Missouri University of
Visiting Professor for Innovation Science and Technology
and Design 1870 Miner Circle
University of Hertfordshire Rolla, MO 65409, USA
Hatfield AL10 9AB, UK
R. Folkson*
E-mail: [email protected] Royal Academy of Engineering
Visiting Professor for Innovation
and Design
Chapters 2 and 3
University of Hertfordshire
R. J. Pearson* and J. W. G. Turner Hatfield AL10 9AB, UK
Department of Mechanical
Engineering E-mail: [email protected]
University of Bath
Claverton Down
Chapter 6
Bath BA2 7AY, UK
K. Howard
E-mail: [email protected]; Lubrizol Ltd
[email protected] The Knowle
Nether Lane
Hazelwood DE56 4AN, UK
Chapter 4
M. Mintz*, J. Han and A. Burnham E-mail: [email protected]
Argonne National Laboratory
9700 S. Cass Avenue
Argonne, IL 60439, USA
E-mail: [email protected]
xvi contributor contact details
Chapter 7 K. Mahkamov* and I.
Makhkamova
J. Bennett
Faculty of Engineering and
Afton Chemical Limited
Environment
London Road
Northumbria University
Bracknell RG12 2UW, UK
Ellison Place
Newcastle upon Tyne NE1 8ST,
E-mail: John.Bennett@AftonChemical.
UK
com
E-mail: khamid.mahkamov@
Chapter 8 northumbria.ac.uk
J. D. Naber* and J. E. Johnson
N. D. Chainov
Mechanical Engineering –
Department of Piston Engines
Engineering Mechanics
Bauman Moscow State Technical
Department
University
Michigan Technological University
Russia
815 R.L. Smith Building
1400 Townsend Drive
Houghton, MI 49931, USA Chapter 12
S. N. Doğan*, G. Henning, T.
E-mail: [email protected]; jenesbit@mtu.
Gödecke, M. Sommer, K.
edu
Fronius, M. Krohn, J. Kiesel and
J. Dorfschmid
Chapters 9 and 10 Daimler AG
HPC D670, Mercedesstr. 137
Q. Xin* and C. F. Pinzon
70327 Stuttgart, Germany
CAE Analysis
Navistar, Inc.
E-mail: suereyya_nejat.dogan@daimler.
2601 Navistar Drive
com
Lisle, IL 60532, USA
E-mail: [email protected]; Chapter 13
[email protected];
G. S. Daehn
[email protected]
Department of Materials Science
and Engineering
Chapter 11 The Ohio State University
2041 College Road-477 Watts Hall
L. L. Myagkov
Columbus, OH 43210, USA
Department of Piston Engines
Bauman Moscow State Technical
E-mail: [email protected]
University
Russia
contributor contact details xvii
Chapter 14 A. Boretti*
RMIT University
M. Juhala
School of Aerospace, Mechanical
Department of Engineering Design
and Manufacturing Engineering
and Production
Bundoora VIC 3083, Australia
Aalto University
Puumiehenkuja 5A Espoo Otaniemi
E-mail: [email protected]
P.O. Box 14300
00076 Aalto, Finland
Chapter 18
E-mail: [email protected]
T. Hofman
Department of Mechanical
Chapter 15 Engineering
Eindhoven University of
K. R. Pullen* and A. Dhand
Technology
School of Engineering and
Den Dolech 2
Mathematical Sciences
5600 MB Eindhoven, The
City University London
Netherlands
Northampton Square
London EC1V 0HB, UK
E-mail: [email protected]
E-mail: [email protected]
Chapter 19
Chapter 16 N. M. Johnson
Ricardo Inc.
Z. Filipi
Detroit Technology Campus
Clemson University
40000 Ricardo Drive
International Center for Automotive
Van Buren Township, MI 48111
Research
USA
4 Research Drive, Room 337
Greenville, SC 29607-5257, USA
E-mail: [email protected]
E-mail: [email protected]
Chapter 20
Chapter 17 M. Ehsani
Power Electronics and Motor
P. Tawadros and N. Zhang
Drives Laboratory
Faculty of Engineering and IT
Department of Electrical and
University of Technology, Sydney
Computer Engineering
15 Broadway
Texas A&M University
Ultimo NSW 2204, Australia
College Station, TX 77843, USA
E-mail: [email protected];
E-mail: [email protected]
[email protected]
xviii contributor contact details
Chapter 21 I. Staffell
Imperial College Business School
K. T. Chau
Imperial College London
International Research Centre for
London SW7 2AZ, UK
Electric Vehicles
Department of Electrical and
J. L. Shang
Electronic Engineering
PEMFC Research Group
The University of Hong Kong
Centre for Hydrogen and Fuel Cell
Pokfulam Road
Research
Hong Kong, People’s Republic of
School of Chemical Engineering
China
University of Birmingham
Edgbaston
E-mail: [email protected]
Birmingham B15 2TT, UK
Chapter 22 V. Molkov
HySAFER Centre
B. G. Pollet*
University of Ulster
HySA Systems Competence Centre
Newtownabbey BT37 0NL, UK
SAIAMC Innovation Centre
Faculty of Natural Sciences
University of the Western Cape
Robert Sobukwe Road
Private Bag X17
Bellville 7535, Cape Town, South
Africa
E-mail: [email protected]
Woodhead publishing Series in energy
1 Generating power at high efficiency: Combined cycle technology for
sustainable energy production
Eric Jeffs
2 Advanced separation techniques for nuclear fuel reprocessing and
radioactive waste treatment
Edited by Kenneth L. Nash and Gregg J. Lumetta
3 Bioalcohol production: Biochemical conversion of lignocellulosic
biomass
Edited by Keith W. Waldron
4 Understanding and mitigating ageing in nuclear power plants:
Materials and operational aspects of plant life management
(PLiM)
Edited by Philip G. Tipping
5 Advanced power plant materials, design and technology
Edited by Dermot Roddy
6 Stand-alone and hybrid wind energy systems: Technology, energy
storage and applications
Edited by John K. Kaldellis
7 Biodiesel science and technology: From soil to oil
Jan C. J. Bart, Natale Palmeri and Stefano Cavallaro
8 Developments and innovation in carbon dioxide (CO ) capture
2
and storage technology Volume 1: Carbon dioxide (CO ) capture,
2
transport and industrial applications
Edited by M. Mercedes Maroto-Valer
9 Geological repository systems for safe disposal of spent nuclear fuels
and radioactive waste
Edited by Joonhong Ahn and Michael J. Apted
xx Woodhead publishing Series in energy
10 Wind energy systems: Optimising design and construction for safe
and reliable operation
Edited by John D. Sørensen and Jens N. Sørensen
11 Solid oxide fuel cell technology: Principles, performance and
operations
Kevin Huang and John Bannister Goodenough
12 Handbook of advanced radioactive waste conditioning
technologies
Edited by Michael I. Ojovan
13 Membranes for clean and renewable power applications
Edited by Annarosa Gugliuzza and Angelo Basile
14 Materials for energy efficiency and thermal comfort in buildings
Edited by Matthew R. Hall
15 Handbook of biofuels production: Processes and technologies
Edited by Rafael Luque, Juan Campelo and James Clark
16 Developments and innovation in carbon dioxide (CO ) capture and
2
storage technology Volume 2: Carbon dioxide (CO ) storage and
2
utilisation
Edited by M. Mercedes Maroto-Valer
17 Oxy-fuel combustion for power generation and carbon dioxide (CO )
2
capture
Edited by Ligang Zheng
18 Small and micro combined heat and power (CHP) systems: Advanced
design, performance, materials and applications
Edited by Robert Beith
19 Advances in clean hydrocarbon fuel processing: Science and
technology
Edited by M. Rashid Khan
20 Modern gas turbine systems: High efficiency, low emission, fuel
flexible power generation
Edited by Peter Jansohn
21 Concentrating solar power technology: Principles, developments
and applications
Edited by Keith Lovegrove and Wes Stein
22 Nuclear corrosion science and engineering
Edited by Damien Féron
23 Power plant life management and performance improvement
Edited by John E. Oakey